Spartan Shield for Dummy-13
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy to print shield for Dummy 13. The handle is snap fit, no glue required! It also has a peg to be worn as backpack.
- Ocena
- 5 / 5
- Polubienia
- 52
- Pobrania
- 379
- Wydruki
- 2
- Wyświetlenia
- 973
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial
This spartan shield for dummy 13 is an easy print, requiring no supports or glue, and assembly is as simple as pressing the longer square peg of the handle into the hole on the shield. Before inserting the handle, ensure the grip of the handle is oriented so that it is in the middle of the shield. Note, this is intended to be a tight fit and will require firm pressure, if you have issues with elephants foot on your prints, you may want to tell your slicer to compensate for that.