Liczymy pasujące modele…
3D Print Files in STL format of the B-01 Tactical Armor from Helldivers 2. HELMET FINISHING TUTORIAL: https://youtu.be/cjfoUQzFuPM Default scaled to someone around 6' tall and 200lbs. The armor includes a few versions of various parts!…
Uses a stanley tape holder clip and 6-32 nut and bolt. Printed with PETG. I did have to drill out hole bigger for screw and I pressed nut in with hammer
Dummy 13 Armor Head may need to be scaled down slightly to fit inside helmet.
I don't condone or condemn AI, but I feel if you used it for a model you should make people aware. I did have to clean it up a bit, but it turned out pretty well. Powered by Image-to-3D from MakerWorld…
It fits on top of the vanilla Dummy 13 chest, 100% scale. It's a great combo with the balaclava model: https://www.printables.com/model/1249428-balaclava-ski-mask-for-dummy-13 Enjoy!
Create your own super light chain mail with 3d printing Turn your 3D printer into a medieval forge with this groundbreaking, multi-layer chainmail model, meticulously designed to maximize space while offering unparalleled fidelity. The…
The Lava Bracer is a 3D printable forearm accessory featuring a dynamic molten rock design with intricate textures, ideal for cosplay or as a unique wearable art piece. Printing Settings Printing Settings: - Printer Model: Prusa i3 MK3S -…
This is a set of blocks that can be used to recreate two versions of the Iron Man Armory Alcove at 250% scale. Version 1 can be found in the Iron Man Armory set released in 2022, and version 2 comes from the Iron Man's Laboratory: Hall of…
This is a custom take on Dummy 13 with a Terminator-style twist. I really think Dummy 13 is perfect to make robots, so here's the most post-apocalyptic, gritty, scary robot out there. Have fun with it ! I used some modified parts of…
Print profile includes armor parts only and the frame from original is needed. Also guide for assembly is available in the original by soozafone. Support them for making this amazing model!
Designed custom armor plates for spine area of Buster Doll Tank action figure. Armor parts can be printed without support (brim is recommended), then connected together using metal rods cut from standard paperclip. There is built in 3mm…
This is a remix of the original snap fit case bottom as well as the version of the top made for the Armor Lite V5 heatsink. This remix is based on the V3.1 case. I printed this with Sunlu transparent PLA with the 0.25mm Structural…
This model is my own design of a Police armored vehicle. For assembly I used a soldering iron to adhere the parts together. I find it stronger and faster than glue. Most of the part locations should be self explanatory. All the tolerances…
This is a digital 3D printable model of Astrid's Iron Armor from the live-action movie How to Train Your Dragon . The download contains 3D models ready to be 3D printed on a 200 mm print bed in STL and OBJ formats. All parts are placed on…
Suit up and soar into action with Ironhog, the pint-sized porcine powerhouse clad in high-tech battle armor! This model captures every heroic detail—from the sleek segmented plating to the palm-mounted repulsor ready to unleash a blast.…
I am Genuinely surprised how many likes and downloads this model got, it is my most successful model so far thank you everyone I printed mine in Bronze-Colored PLA with 15% infill, brim, and supports everywhere. Be VERY careful when…
Tactile way of tracking player trackers like: Hope, HP, Armor and Stress. Max range for each counter that can be tracked is 15. Most of the values in Daggerheart cap at 12 but a maximum of 15 is possible with the right combination of…
A Hotwheels-sized model of the Karin Armored Kuruma from GTA 5 based on a 2015-or-so Lancer Included are single piece six-spoke wheels, however any standard Hotwheels wheels will do. To install them, put them on an axle (even a paperclip…
The helmet features: - Assembled and casting version. - Bambu Studio Project and GCODE files to get started printing sooner! - Visor stand-in and vacuum forming bucks. - Default scaled to fit up to 24.5" circumference heads. - Expertly…
Full Image Catalog The complete gallery of my works can be found at Portfolio. You can search by the file’s reference number or simply click the preview image to open it directly. This Iron Man model captures the sleek and high-tech…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com . You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
An easy to assemble, wearable and fully functional knight's armor design. This 3D printing file kit accurately matches 16th century thigh and knee armor from museums. It is fully articulated to allow for a total range of motion, including…
NEW UPDATED VERSION – ARTORIAS SWORD (FREE UPDATE) – Completely redesigned pegs and sockets – Sockets are slightly larger than pegs to ensure perfect fit even if a printer produces oversized pegs – Simpler, stronger peg design for better…
This is a digital STL file – print-ready and high quality. The Executor Armor + Darkness Helmet Bundle combines the complete Executor full plate armor with the Darkness variant helmet , offering a premium cosplay set designed from scratch…
This model was designed specifically for the Crash Derby board game. During the design process, I aimed to follow the established vehicle design patterns of Crash Derby. The design combines elements of off-road vehicles , armored off-road…
You can't have a game targeted to 3D printing afficionados without a Benchy! While this isn't a very original idea, I do believe I put in the extra effort to make this Benchy feel right at home in the Crash Derby game. Printing Printed…
A brutal armored guard dog sculpture inspired by dark fantasy and medieval aesthetics.
If you enjoy my designs and would like to support my work, or get a commercial license to sell prints of my models — you can join me on Patreon: 👉 https://www.patreon.com/cw/AR3DP Stylized low-poly dragon in a seated pose wearing detailed…
Part of the Oni Samurai Collection. Detailed samurai armor inspired by Japanese oni legends, designed for 3D printing and painting.
Important I updated the modell i added more details to the back of the helmet and made the wall much ticker to fix durability issues. The ear and went piece now fused onto the helmet so prints as one, but if needed in meshmixer can be…
This model of chestplate can be in iron, copper, gold, netherite, ect... even if the image is a diamond chestplate (its the same model) can be plug with armor stand, and creeper head.
Use these modular weapons for the miniature mounts to add a new layer of interaction to your games. Quick weapon swaps allow disarm spells, critical miss effects, and quick changes between blunt, bladed, or magical loadouts before or…
T45-T60 Power Armor Helmet - Can Holder (Two types) These helmets are a mix between T-45 and T-60 power armor from the Fallout Game and TV series, I'm afraid not all the details will be completely accurate. Fits long EU cans with a…
T51 Power Armor Helmet - Can Holder To make this canholder, I tried to make accurate details from a T-51 (Fallout) power armor helmet, I hope you like it :) Fits long EU cans with a capacity of 0.5L . You can also use my insert for 12oz…
Bring the spirit of ancient knights to your desk with this medieval armor–inspired pen holder. A bold and iconic decorative object that blends historical character with modern functionality. Designed to be eye-catching yet fast and easy…
A futuristic sci-fi statue featuring a massive armored titan walking alongside a sleek female android.
These models are inspired by the tools used by the Mandalorian Armorer in the Mandalorian. The pliers feature articulated joints , allowing them to move after assembly. The hammer has been separated into multiple parts , making it ready…
The helmet model includes: - Assembled, Casting, and Solid Versions - Paint guide alternates, with yellow areas recessed for easier painting - Bambu Studio Project and GCODE files - Default scaled for 24" circumference heads - Sizing…
A remake of the regular dummy 13 thigh armour piece to have a tactical pouch. Please post makes so I can see how it looks! Great for: Making soldier versions of the Dummy 13!! Print with: Any filament. Note: PRINT UPRIGHT AND USE SUPPORTS…
Made a license plate cover for my new 2026 Nissan Frontier Dark Armor truck. I did the base in PETG-CF and the rest in HF PETG. I used a PLA support interface for super smooth support removal.
This is a digital 3D-printable model of Melinoë’s armor from the Hades II game. Designed at full scale for cosplay, it features engraved lines for easy multi-color 3D printing and cel-shaded–style painting . The set includes the laurel…
Introducing the FDM (Fixum Dude Motors) print in place Armored Truck. It's a safe bet you'll get hours of fun from this armored truck. Find the entire FDM Collection of vehicles here:…
Design Concept This Armored Warrior Dragon Planter seamlessly blends fantasy art with functionality. Its intricate armor details highlight the beast's formidable nature, while the open back allows for plant growth, making it both a…
Enjoy my work? Find my full collection of work over on Patreon Or Show your support by buying me a coffee ! Per request, I created my Armored Samurai. Supports are needed.
Mysterious cloaked warrior wearing full tactical armor and a hooded cape.
Better fit for the file ATmount_front_arm_slide_Trident_offset.stl, and also removed the hole that was not needed.
A fierce warrior skull mug wrapped in spiked armour details, with a bold crown-like frame and a textured handle that reads like a dragon tail or scaled grip. Perfect for dark fantasy, barbarian, gothic, and warrior-themed collections.…
Athena, the Greek goddess of wisdom and strategy, portrayed as a confident armored figure ready for battle.
Print in PLA with supports. I put a lot of work into rearranging the parts so that they print well and require less supports, but I would HIGHLY RECOMMEND that you do not enable brim for this model. It almost screwed up my entire print. I…
This Futuristic Mech Knight is a heavily armored sci-fi warrior designed to command attention. Featuring layered exosuit plating, sharp angular armour panels, and a glowing central energy core, this model blends knightly silhouette with…
Descend from the heavens with this powerful Archangel Warrior , a dynamic winged knight sculpted mid-flight. Featuring expansive feathered wings, detailed plate armour, and a long divine spear, this model captures celestial strength and…
This is a digital STL file – print-ready and high quality. The Gael Chest Armor Set includes the full upper torso assembly inspired by Slave Knight Gael, sculpted from scratch with maximum surface fidelity. Every plate carries rich,…
THIS IS A SET OF DIGITAL FILES FOR YOU TO 3D PRINT YOUR OWN! Hello! Upon purchasing these files you will find, as always, a complete instruction guide to take you by the hand all throughout the assembly of your own set of 3D printed plate…
In medieval Bohemia, a man’s blade was his honor. Today, it’s his OneBlade. This model combines the world of Kingdom Come: Deliverance with Philips OneBlade into a functional medieval armory for your bathroom.
This Scorpion Warrior Gladiator fuses brutal arena combat with monstrous desert anatomy. Armoured in layered plate and gripping a long crescent-bladed polearm, this creature balances humanoid intelligence with the lethal presence of a…
This is a digital STL file - print-ready and high quality. This set represents the upper armor configuration of Harros the Vassal from Mortal Shell I and II, recreated entirely from scratch for advanced cosplay builds. The design captures…
This is a digital STL file - print-ready and high quality. This set represents the lower armor configuration of Harros the Vassal from Mortal Shell I and II, recreated from scratch with heavy layered steel structure and high-density…
This is a digital STL file - print-ready and high quality. This set combines the full upper and lower plate armor of Harros the Vassal, including the gorget, without the helmet. Every element is sculpted from scratch with layered steel…
A modified version of the dummy 13 chest plate to have the medical cross on it and has 2 pouches for item carriage. WILL NEED SUPPORTS LIKELY.
This Ice Knight Frostblade Champion stands clad in layered frozen armour, gripping a jagged frost-infused blade that looks carved from glacial ice. The angular plate design, sharp pauldrons, and wind-swept cape create a commanding…
This compact armored dragon statue features thicker scale plating, a powerful stance, and short folded wings while remaining optimized for easy FDM printing. The sculpt balances armor texture with smooth structural surfaces to avoid…
Unleash brute strength on your tabletop with this imposing Minotaur Warrior 3D printable model. Clad in heavy armor and wielding a massive double-headed battle axe, this horned beast stands ready for combat. The sculpt combines muscular…
Honor the age of steel and chivalry with this imposing Medieval Knight Statue 3D printable model. Standing upright with both hands resting on a grounded longsword, this fully armored knight captures the timeless presence of a castle…
This is a digital STL file – print-ready and high quality. The Ultimate Solomon the Scholar Cosplay Armor Set is the complete life-size plate armor assembly including the helmet, recreated entirely from scratch with extreme structural…
This is a digital STL file – print-ready and high quality. The Solomon the Scholar Full Plate Armor is a complete life-size armor set without the helmet, sculpted entirely from scratch with dense structural detail and ornamental…
Built from the ground up to be 3D printed and worn, these files are made for costuming. They feature separated parts for easy printing and wearing. The armor files include: - Pre-separated into 41 keyed and interlocking parts - Default…
Sandwich Dummy 13 armor. USE SUPPORTS. Also, if you decide to print this, please post a picture so I can see how it turned out!
If you downloaded the model, it means you are interested in it. Don't forget to like it, please!
Print Settings: Material: PLA Silk Layer Height: 0.12mm Infill: 15% Supports: Tree Supports (Organic) MANUAL Creation Process: This model was created using a hybrid workflow combining AI generation and manual 3D sculpting: AI Generation:…
This is a digital STL file - print-ready and high quality. Before reading the full description, play this in the background: This armor represents Griffith from the Golden Age period, recreated with historically grounded proportions and…
This is a digital STL file - print-ready and high quality. Before reading the full description, play this in the background: This set combines the full Golden Age armor with the fully functional Griffith helmet. 📦 Helmet: - Helmet shell -…
This is a digital STL file - print-ready and high quality. Before reading the full description, play this in the background: This set represents Griffith’s resurrected leg armor, redesigned according to the later manga appearance. The…
This is a digital STL file - print-ready and high quality. Before reading the full description, play this in the background: This set represents Griffith’s resurrected upper armor, redesigned with a sharper and more imposing silhouette…
This is a digital STL file - print-ready and high quality. Before reading the full description, play this in the background: This set combines Griffith’s resurrected upper and lower armor into one complete life-size cosplay configuration.…
This is a digital STL file - print-ready and high quality. Before reading the full description, play this in the background: Complete resurrected Griffith armor including full upper armor, lower armor, and resurrected helmet. 📦 Includes:…
sexy woman with big tits in battle armor with shield and sword
If you like this model, don’t forget to check out my other creations in my collection — you might find something else you’ll love 😉 https://www.printables.com/@Paja/collections/3238143 Thank you so much for every download, like, and…
The dummy 13 500% model by @Vasichkin had knee armor that didn't fit so I scaled it properly and thought I'd post it
Unleash a beast of legendary strength with this Articulated Armored Dragon! This model stands out with its heavy, interlocking armor scales that protect every segment of its coiling body. Designed for both durability and dynamic movement,…
Unleash a beast of legendary strength with this Articulated Armored Dragon! This model stands out with its heavy, interlocking armor scales that protect every segment of its coiling body. Designed for both durability and dynamic movement,…
Wall-Mounting-Bracket for BerryBase Full Armor RP5 5 housing. GPIO connector is slightly covered from the bracket. Suitable housing RPI5-FARC-SI: https://www.berrybase.at/detail/019234a61c0c72a682ba4caaa67fd94d
This model is compatible with the lego system.
A unique 3D printable creation — this Forearm Bracer Armor, Leather Look Texture, Strap Slots, Medieval Fantasy Style Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print…
This is a digital STL file - print-ready and high quality. This set represents Yhorm the Giant upper armor configuration — without leg armor, without crown, and without the Great Machete. This is the only life-size Yhorm torso cosplay…
This is a digital STL file - print-ready and high quality. This is the only full life-size Yhorm the Giant cosplay armor available on the market. Inspired by Dark Souls 3 and rebuilt from scratch, this set captures Yhorm’s massive…
