Goggles X URUAV V3 + Eachine Pro58 Mount with DVR
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case and mounting hardware for mounting a Uruav V3 module together with the Eachine Pro58 Receiver and Runcam mini DVR.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 296
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
With this case you can mount your Uruav V3 module together with an Eachine Pro58 VRX and a Runcam mini DVR for recording your flight footage.
Print with PETG or PLA with 0.15 or lower layer height for best results. Supports are only needed for the little pocket inside of the bottom part and the overhang of the top part, remove autogenerated supports from the record button hole.
Use 4 M2 Screws for attaching the case to the bottom plate.
For attaching it to the goggles, use the “walksnailgoggleXanalogadapter.stl” file from the original model: https://www.printables.com/model/684032-walksnail-goggle-x-analog-adapter-uruav-akkpro58
I designed everything with FreeCAD 1.0, only reusing the wedge of the mounting interface from the original model. I have included my source project file for you to modify to better fit your needs. Feel free to reach out if you have any problems or questions.
Have fun printing!