Liczymy pasujące modele…
This is a drone frame for the Eachine E010 Mini. Be aware that this frame makes the drone way more harder to control (and a lot faster). So it may not be suited for beginners. It also doesn't have prop guards, so you may want to be more…
I wanted to design a frame for the Eachine E010 style drones that is very light but can withstand crashes. So here it is in 6mm and 7mm motor variations. I play a lot with my E010 built into this frame and I crash a lot but the frame…
Die Originalen Füße von den waren scheiße, hab die vom Green Hornet nachgemacht.
Holder for Eachine TX805 VTX for the Source One V5 frame. In fact, you can use this for any frame with 20x20mm screw spacing. The screws I used to attach this to the drone were m3x7/8mm. Designed in Fusion360
This is a camera + VTX holder and protector for the Eachine E010S. I couldn't find appropriated version so I started again from the Oscar Liang version made for E010 (the Camera + VTX module is much smaller on E010S). I have the E010S -…
Eachine E010 Super Mini Light AIO camera mount 20 deg Category: R/C Vehicles
Eachine E010 battery adapter i use elastic sbs filament Category: R/C Vehicles
Echine original 1s battery box Print Settings Printer Brand: Prusa Printer: I3 MK3S Resolution: 0.2 Infill: 15% Filament: 3D Jake PLA Category: Hobby
I had trouble getting a good fit with the original model. It was too loose for the Racedayquads 250mAH "HV" Batts that I run. I measured a battery and drew my own version of this from scratch with inspiration from the original. This has a…
just pull of the old sticks of your e010 (or similar) radio and put on these more comfortable ones. you may have to drill out the holes to make them fit. Print Settings Printer: Turnigy Fabrikator Rafts: No Supports: No Category: R/C…
Eachine E010 Mini Stick Handle Extension. Clips on to 13mm x 2mm knob. Designed to be printed with the button down and the clips up. Print Settings Printer: Monoprice Mini Rafts: No Supports: No Resolution: .1mm-.2mm Infill: 100% Notes:…
I totally redesigned the Box from MegaCadler to optimize print time a little. Printing is still ongoing. Slicer tells me 1:35h instead of 3:20h for the lower part. Furthermore I added some clips to keep it save closed. Category: R/C…
Inspired by https://www.thingiverse.com/thing:2579328 , this is a front camera mount for the Machine E010s Pro (shark body). The mount is at 20 degrees and the camera is held on by a rubber band, but 3m foam tape would work just as well.…
Hi, here's frame support for Eachine E010. Now frame feels more stiff. Hopefully motor cups will now take hits better and supports struts will last longer. Uploaded two files 46mm and 47mm motor to motor distance. Edit: added 1mm thick…
Here is a remixed version of joeweese's camera mount for the Eachine E010S. Here is his camera mount: https://www.thingiverse.com/thing:2268152 I tried making his camera mount and it worked fine for a while, but after several flights, the…
This was made to protect the the camera and it's antenna when mounted atop an RC car from falls and topples. It has stood up to the task well with the S116 MAX RC car.
Full Protection, 10, 15, 20 and 25deg angles. Print in TPU for more durability and PETG for more cam protection (but will break while crashing) Use M3x25 Screws
Print in TPU use TBS ND Filters: (https://s.click.aliexpress.com/e/_9ROQbh)
BN-880 GPS mount for my Eachine Cvatar. Very light weight. Printing in TPU is preferred, but PETG also works well on this design. PLA might also work, but I have not tried. Supports are needed due to the central overhang. Hole Spacing for…
I present my Eachine Tyro 79 Part collection: Battery Saver, Cameramount, a cute sharkfin, plate on the back and antenna. All parts were made with PLA and high infills. Depends on your flight style;-)
This is adapter to mount additional lens from model EV800DM to EV800D You have to buy: Eachine Ev800dm Goggles - Zoom Screen Mannifier You have to print 2 pices of adapter Print wih 0% fill and brim 3-5mm without support Next open goggle…
A small Case for the Eachine PRO58 Diversity Receiver for my Fatshark Attitude V2. Print instructions Category: R/C Vehicles Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Supports: No Resolution: 0.20 Infill: 20% Filament:…
With this case you can mount your Uruav V3 module together with an Eachine Pro58 VRX and a Runcam mini DVR for recording your flight footage. Print with PETG or PLA with 0.15 or lower layer height for best results. Supports are only…
A case for the Eachine D200 FPV watch Printed at 0.2mm in PLA with Clear TPU used for the buttons.
Offset mount for 30x30mm so the VTX sits in the middle. Two models included. Thin platform and thick.
Here is a remixed version of joeweese's camera mount for the Eachine E010S. Here is his camera mount: https://www.thingiverse.com/thing:2268152 I tried making his camera mount and it worked fine for a while, but after several flights, the…
This is an alternative camera & vtx mount for the Eachine Tyro69 fpv race drone. It allows to mount a proper nano fpv camera and a more powerful vtx. I've attached two versions, one with a hole in the back to increase airflow in case the…
Also compatible with Udirc 1603 Tested on my own eachine eat 15 car. After over 30 hrs of usage it is still durable(pla+). Hole horizontal expansion: 0.0 (for my printer. It depends on your 3d printer)
TPU for flexible, shock-absorbing properties or PETG for a stiffer assembly.
***Warning: I need to redesign 2 and 9 Blade Prop, please print 3 and 5 only in the meantime.*** (2,3,5,9) Blade Design 3 Blade Propellers are tested and perform very good. 5+9 just 4 fun. I Print with: ASA max 50mm/s 256°C/104°C 0.12mm…
Hi, this is Eachine 700TVL camera holder for Diatone ET160 frame. Thanks to Jussi H. for 250 sized design!! Edit: 9/2017, as this camera is not very good quality, you could consider longer stand off's and use Runcam Mini or Micro 2…
Battery holder designed to mount securely on the rear section of a 25 mm FPV goggle head strap. Perfect for improved balance and comfort when flying.
The stock FPV camera mounting option does not go beyond approx 10degrees. This is a mount design that lets you mount it at 20 and 30 degrees. Print Settings Printer: Prusa i3 Rework Rafts: Doesn't Matter **Supports:** No Resolution: 0.2mm…
I'm using the bad shipped with the goggles to store them in a bigger bag. The only issue with it is that it could turn the power on by pressing the button for long enough, due to another item being in the same storage. I made this very…
Support caméra TX06 Eachine avec attache GoPro Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200 Infill: 100 Filament: Prusament PETG / PLA / FLEX Category: Camera
Not for X220s. If you are interested in a version for the X220s you can contact me. I attached the gps module with 3m double-sided adhesive tape. but you can also use a cable tie (2.5mm). Layer height 0.2 - 0.32 TPU 95A
This little customizable angled case perfectly fits the Eachine TX03 AIO camera. You may have to slightly change some parameters in the OpenSCAD file to match your printer tolerances. The cut on the back-right-side is for the video-in and…
This performs two tasks: Protect your Eachine EV800DM goggles from accidentally turning on in your bag because something pressed the power button. Protect your SMA Antenna connectors from dust, debris & deformation. This is a simple .4mm…
It's pretty tight on Wizard x220,but fits. I attached a .blend file so feel free to widen it a bit if needed. You might need a brim, but I did it without and worked great on Creality Glass Bed. My setup: 0.4mm nozzle, 0.2mm layer height,…
the holes may be slightly off, I handled it by placing the heated inserts in a way that mitigates that.
Ce modèle est divisé en deux parties : Un conduit pour le câble XT60 qui évite que le câble parte dans les hélices et s'abime.(PETG conseillé pour plus de résistance aux crashs Une butée pour éviter que la LiPo ne glisse et tombe du drone…
J'utilise une stack Speedybee qui est plus grosse que la stack d'origine du Eachine. La paroi ne fonctionne donc pas, étant trop étroite. J'ai donc redessinés une partie de la paroi ,moins longue, mais qui protège les fils. Il faut…
This is an alternate frame design for the Eachine BAT QX105 quadcopter. The original carbon fiber frame is quite fragile so creating a backup was a top priority for me after I bought one. As expected the carbon frame broke on the second…
This is the OpenIPC VRX case model. It has been designed specifically for the Eachine EV200D goggles, with no consideration for other products' goggles. Since the goal was to achieve a compact size, a smaller BEC must be used to fit into…
Battery goggles strap holder for emachine 1600ma 7.2v usb battey Print Settings Supports: Yes Resolution: 0.2mm Infill: 50% Category: Hobby
This is just a small tray to neatly organize a FrSky XM+ / Jumper R1F and a Eachine nanoVTx, which greatly increase range and video quality. Weighs in at around 1.5g, while both components are friction fit they might come loose in harder…
Compared to the original I've just made the model 12mm shorter, so it would fit my headset. The 3mf file is sliced into multiple parts, just scale the middle part and move the SMA connectors into place. Fits an SMA distance of 78.8mm.…
An adapter for a eachine TX06 camera, so that you can mount it in a MK4 camera mount. 19,2x29 mm
After unpacking my new drone and immediatly crashing it into the fence across the street, this was the first piece I needed to replace. This fits nice and snug so hopefully it'll stay put a little longer then the original. Category: R/C…
Ce modèle 3d adapte le eachine wizard x220s au air unit o4 de DJI.Il se compose : D'une adaptation des trous de montage d'un support de caméra (insérez un rilsan à l'arrière, puis introduisez un mouchoir découpés, puis plié entre le…
This is the body of the Eachine Sphere Link IMX415 camera in case you break it (just like I did). Might fit the IMX335 version but I don't have one at hand so try hat your own risk. Took the measurements from a broken camera body and did…
Pour une transition vers le o4 lite, il vous faudra : "support émetteur o4 lite" "Support caméra o4 lite" Soit "body", soit "Réhausseur drone fpv(avant)" + "Réhausseur drone fpv Arrière" Le "conduit XT60" n'est pas compatible avec "GPS",…
Glasses case for the Eachine EV800D. Everything is made nicely, nothing rattles around. The only thing I’d suggest is ad
Print in TPU or Vario Shore TPU Mount with Spacers for ideal dampening. Holes fit M2 Screws
TPU Accessory mounts for the Eachine LAL3 frame Includes: Arm bumpers Express LRS antenna mount - Fits the Happymodel EP1 antenna VTX antenna mount
TPU Accessories for the Eachine Shadow Fiend Includes: Arm bumpers ExpressLRS antenna mount - Fits the Happymodel EP1 antenna VTX antenna mount GPS mount - Fits 18x18mm GPS like M8N, BN-180
Adjustable case for the Eachine TX02 camera. Designed to be mounted on a RC car. Use a M4 screw and nut to secure the camera’s orientation. Use double-sided tape to attach the camera to the RC car. Use two cable ties to secure the rear…
I was a bit fed up with the exposed battery on the Eachine Falcon 120, which made landings (for me at least) a bit tricky. I created some little light weight legs which can be stuck below the motors on each arm. I've used velcro tape for…
This was made to protect the the camera and it's antenna when mounted atop an RC car from falls and topples. It has stood up to the task well with the S116 MAX RC car.
Hallo! Hierbei handelt es sich um einen Ständer für den Eachine ROTG01 Empfänger. Der Ständer kann zusammengeklappt werden um ihn besser transportiern zu können. lg, Tobi Nozzle 0.5mm Filament PLA Category: R/C Vehicles
You want to go for a quick Whoop flight during your lunch break, but your goggles are dead even though you packed them in your backpack fully charged this morning :-( The first time: bummer. The second time: annoying. By the third time,…
A simple, lightweight, snug snap-fit guard for arms and motors for Eachine Wizard X220HV. Designed to be very easy to print with TPU plastic. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2…
updated -add hole for fc's screw replace that two stupid standoffs that try to puncture the battery every time i crash Print Settings Printer Brand: FlashForge Printer: Creator Pro Rafts: No Supports: No Resolution: 0.2 Infill: 30…
Mount for the Eachine TX04 AIO camera for the Inductrix / Tiny Whoop frames. I'm using it on a cockroach frame from NewBeeDrone. Use a bit of hot glue to keep the camera in. .f3d file is on Thingiverse because PrusaPrinters doesn't…
Customized version of http://www.thingiverse.com/thing:2012822 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=2012822 Instructions Using the following options: CAMERA_ANGLE = 30 Category: R/C Vehicles
Customized version of http://www.thingiverse.com/thing:2012822 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=2012822 Instructions Using the following options: CAMERA_ANGLE = 20 Category: R/C Vehicles
Customized version of http://www.thingiverse.com/thing:2012822 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=2012822 Instructions Using the following options: CAMERA_ANGLE = 0 Category: R/C Vehicles
Customized version of http://www.thingiverse.com/thing:2012822 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=2012822 Instructions Using the following options: CAMERA_ANGLE = 10 Category: R/C Vehicles
Default titl is 25°, you can use the Customizer to adjust the angle Armattan Edge 100X: https://armattanproductions.com/pages/product_details/3786 FVT Littlebee 20A BLHeli-S 1104 7000kv (alternative: 4x RS1306 4000kv) Piko BLX Eachine…
Remixed the camera mount so that it fits the H8 frame Modified SCAD file included so that you can further customize it if needed Category: R/C Vehicles
this is a tilted camera support for EACHINE QX90 micro quad copter. Tilt is 20 degrees. This remix lets you mount the camera in the front of the quadcopter, significantly reducing the total height, and moving the props away from the…
The center screw holes on my Foxeer Monster camera stripped in a crash. That pretty much made the camera useless with the Eachine Wizard mount plates. So I remixed this one to fit my frame and it uses the top and bottom screw holes…
Little camera stabilizer in delta format you use the original camera frame... you only replace the upper part of camera holder on mjx bugs b3h and eachine ex2h the file gimbal mjx bug b3 pt2 need a support when you print i used 20% infill…
È la modifica dello sterzo di un'auto RC giocattolo (Eachine EAT12) per poter montare un servo SG90 (classico servo da 9g) per poter avere uno sterzo completamente proporzionale. Il progetto è stato trattato sul mio canale YouTube "Floppy…
This is a box for the cute eachine tx01 and I presume it wil fit to tx02 which is the same product but a 250mw radio. I had to sand the original size a lot to make it fit, but if you scale it 0,02 it fits almost out of the printer - the…
One-piece adapter for moneagle screen to gopro mount. Tested with PLA, works great with any tx16s gopro mount or other gopro accesssories. Category: R/C Vehicles
get more precision control with the Eachine 010 controller by extending the joysticks. 2X's the length. I actually was rather surprised how much a difference it made. A some what level and controlled hoover can easily be obtained. No…
This is a prop guard for mjx bugs 3 mini/eachine ex2 mini. Its flat not like the original, but its easier to print this form, and I think it works. Print Settings Printer: prusa i3 rework 1.5 reworked by hygy Supports: No Resolution: 0.16…
EACHINE Wizard X220 Micro Camera Adapter. I've designed a micro camera adapter for my EACHINE Wizard X220, it currently holds a Runcam Eagle Micro but it should hold other micro-cameras as well. It attaches to the front 2 M3 holes of the…
EACHINE Wizard X220 Feet (16mm) Drone skid plate/feet, designed for my EACHINE Wizard X220. I used M3x10mm Titanium screws with these feet, they go through the feet, frame and motor protectors to screw into the motor. The motor screw…
If you need reading glasses and have one of those FPV goggles, you know the pain of only seeing a blurred image on the screen 😓 This little clip let's you use the lenses from one of those cheap magnifying glasses:…
Probably best printed in tpu or some sort of wear resistant filament
This blind plug covers holes after fake antennas removed from Eachine E58 remote control. You can also replace one fake antenna with real 2.4 GHz antenna from old WiFi router. Print Settings Rafts: No Supports: No Resolution: 0.1mm…
This is my improved version of the Box for Lizard 95 (previous version see https://www.thingiverse.com/thing:2472510 ) Most of all the Box was changed to fit for my modified Lizard 95 with a RunCam Micro Swift plus an ATX03 transmitter.…
I made this Landing Skid because I don't want to hit the ground with the Battery. Also includes a 4mm plate so that the battery and velcro can be mounted level. The Skid exists in 3 versions: with 4 feet below the motors "Skid4feet.stl"…
The eachine Lizard95 is an awesome piece of fun! This Box is an appropriate case for storage and transportation where you can also put some spare parts in it. It is big enough for the Lizard plus my additional Landing Skid. If you don't…
These two tiny boxes protect your eachine E55 and also store some batteries, charger, tools and remote control. Have fun :-) Category: Hobby
This tiny box protects your eachine E010S and also stores some batteries, charger and tools. I added some rubber dampers at the bottom of the middle part of the case. Have fun :-) Update: I added another cover (E010S_o2.stl) that gives…
I needed a reduction for my EV800D to a mobile phone, and there it is. As any owner of these glasses know, the display can be removed and the second part is loupe, so the idea was to use it not just for self builded drones but also for…
My version of a non conductive antenna guard for the Lizard 95. Tried to keep the optics close to the original one. Category: R/C Vehicles
Simple holder to protect the Eachine VTX03 Super Mini. Category: R/C Vehicles
The Falcon 120 drone has a vulnerable camera, designed a little observatory style dome to offer some protection to the camera. Mount by drilling holes in print and using M2 nut & bolt to attach to the two slots under the tabs on each side…
