Eachine-010 Whoop HV Battery cage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I had trouble getting a good fit with the original model. It was too loose for the Racedayquads 250mAH "HV" Batts that…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 162
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I had trouble getting a good fit with the original model. It was too loose for the Racedayquads 250mAH "HV" Batts that I run. I measured a battery and drew my own version of this from scratch with inspiration from the original. This has a nice friction fit of both the cage into the original battery bay as well as the battery in to the cage. Battery can be easily removed, but shouldn't come loose except maybe on the absolute harshest of impacts.
I printed with .2mm height, 30% infill with PETG. Mine weighs in at 1.5G.
Category: R/C Vehicles