TinyHawk Freestyle Frsky XM+ / Jumper R1F and Eachine nanoVTx tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is just a small tray to neatly organize a FrSky XM+ / Jumper R1F and a Eachine nanoVTx, which greatly increase…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 217
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is just a small tray to neatly organize a FrSky XM+ / Jumper R1F and a Eachine nanoVTx, which greatly increase range and video quality.
Weighs in at around 1.5g, while both components are friction fit they might come loose in harder crashes- I added a bit of sticky tape underneath them. They should slot in fairly easy and can be removed by slightly bending the tray. Doesn't add much height and leaves the USB port accessible.
Secure down with longer screws and a nut on top.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2mm
Infill:
25%
Filament: Sunlu PETG black
Category: R/C Vehicles