Box for eachine Lizard 95 (Version 2 with RunCam MicroSwift)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my improved version of the Box for Lizard 95 (previous version see https://www.thingiverse.com/thing:2472510 )…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 240
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
This is my improved version of the Box for Lizard 95 (previous version see https://www.thingiverse.com/thing:2472510 )
Most of all the Box was changed to fit for my modified Lizard 95 with a RunCam Micro Swift plus an ATX03 transmitter.
But it still fits to the stock model, rather more I added some options for this.
The empty space around the Skid is now used as additional spare parts box.
The closing "Bottom_Case_Closing.stl" is fixed with the part "Snap.stl" that must be mounted with an M3 screw at the bottom part "Case_bottom_Skid.stl".
For those who don't use my Landing Skid (https://www.thingiverse.com/thing:2472520) I have provided a smaller bottom case with some fixtures (Case_bottom_woSkid.stl).
If you want to create other parts around the Lizard I provided my simplified Lizard model as .stl and .obj.
Changing the stock camera to a RunCam Micro Swift is very easy:
- remove the cfk camera holder and reinstall it by rotation of 180° (so that the original camera would look backwards)
- remove the stock camera
- mount the printed part "ATX03_Antenna_holder" in the upper holes where the stock camera was fixed.
- mount the TX03 transmitter with some potection foam and a cable tie. The antenna position can be moved up and down as you like.
- drill a 2mm hole in the middle of a spare bolt and mount the Micro Cam with its frame here using an M2 srew and mount them on the cfk parts as shown on the pictures.
Category: Hobby