1 / 7
Gearbox for Peugeot 3008 RC car — zdjęcie 1
1 / 7

Gearbox for Peugeot 3008 RC car

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

3,67 € – 4,48 € netto (bez VAT)

Dla pliku: 04GBX-Gearbox_0.2mm_PLA_MK3S_4h47m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 4,07 € netto (środek widełek).

Masa podana przez autora
36 g
Czas druku podany przez autora
4,79 godz.
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

This is a compact 1 : 8,33 gearbox for my new RC project

Ocena
0 / 5
Polubienia
21
Pobrania
83
Wydruki
2
Wyświetlenia
741
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution — Noncommercial

The main challenge for the 3008 RC car is being able to fit everything under the hood because the body is to scale (1/12).

So here is a variation of the gearboxes you've already seen on my other RC car projects.

As usual the input comes from the pinion (M5 attachment to a 2216 brushless motor for instance) but this time the output is also a pinion attached to the differential, eliminating transmission shafts. This is possible because the car is only a front wheel drive (like the real one).

As usual I use M3 screws and MR117 ball bearings (11x7x3)

Mounting

The gears have a small boss on one side; it usually faces the BB or another gear.

Assemble the axles separately (The print file puts the spacers together with their axles) (right to left):

  • long axle: BB, big gear, big spacer, small gear (boss), small spacer, BB
  • 2nd Axle: BB, big gear, small gear, spacer, BB
  • 3rd axle: BB, small spacer, (boss) big gear, big spacer, small gear, BB
  • 4th axle: BB, big spacer, (boss) small gear, small spacer, big gear, BB

 

Start with the left housing and put the 2nd and 3rd axles in.

Add the middle housing (2xM3 screws). Now put the 2 remaining axles in.

Now add the right housing (3xM3 screws).

You are left with parts 04 and 20 (the 2 pinions) that mount on the differential and the motor.

Tagi