1 / 7
Gearbox for Peugeot 3008 RC car — image 1
1 / 7

Gearbox for Peugeot 3008 RC car

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a compact 1 : 8,33 gearbox for my new RC project

Rating
0 / 5
Likes
19
Downloads
80
Makes
2
Views
729
Reviews
0

Updated at source:

Model information

Category
Vehicles
License
Creative Commons — Attribution — Noncommercial

The main challenge for the 3008 RC car is being able to fit everything under the hood because the body is to scale (1/12).

So here is a variation of the gearboxes you've already seen on my other RC car projects.

As usual the input comes from the pinion (M5 attachment to a 2216 brushless motor for instance) but this time the output is also a pinion attached to the differential, eliminating transmission shafts. This is possible because the car is only a front wheel drive (like the real one).

As usual I use M3 screws and MR117 ball bearings (11x7x3)

Mounting

The gears have a small boss on one side; it usually faces the BB or another gear.

Assemble the axles separately (The print file puts the spacers together with their axles) (right to left):

  • long axle: BB, big gear, big spacer, small gear (boss), small spacer, BB
  • 2nd Axle: BB, big gear, small gear, spacer, BB
  • 3rd axle: BB, small spacer, (boss) big gear, big spacer, small gear, BB
  • 4th axle: BB, big spacer, (boss) small gear, small spacer, big gear, BB

 

Start with the left housing and put the 2nd and 3rd axles in.

Add the middle housing (2xM3 screws). Now put the 2 remaining axles in.

Now add the right housing (3xM3 screws).

You are left with parts 04 and 20 (the 2 pinions) that mount on the differential and the motor.

Tags