1 / 4
2" pavo 20 TPU Propguards with PETG reinforcement-inserts — zdjęcie 1
1 / 4

2" pavo 20 TPU Propguards with PETG reinforcement-inserts

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

TPU Propguards for Pavo20 with PETG inserts for more stability, but still bouncy and resistant.

Ocena
0 / 5
Polubienia
33
Pobrania
247
Wydruki
1
Wyświetlenia
1486
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

TPU Propguards for Pavo20 with PETG inserts for more stability, but still bouncy and resistant.

this is a modification of this Pavo20-replica whoop duct
https://makerworld.com/de/models/53282?from=search#profileId-57500
PETG survived some flights, but will break sooner or later.
TPU was too elastic for me, so I made a combination of both. PETG rings that are pressed into the rubber print and thus provide more stability, but still remains very resistant. It survived already heavy fails.

Although it can still happen that the props hit the ducts in a crash, but it should still provide bouncy (nearly) unbreakable protection. 
just in case … broken PETG rings can be changed quickly.

My Printsettings:
TPU D40 at 0.2mm
PETG at 0.2mm
no support needed
I screwed directly in the TPU without using thread-inserts 
 

Tagi