Liczymy pasujące modele…
To complete this build you need a brass boiler cap base which you can get from several places. I bought mine here: https://coffee-sensor.com/product/la-pavoni-lever-boiler-cap-base-in-brass/ The shaft need to be made in PC (polycarbonat)…
Replacement Mount for Pavo Light. Nice and tight fitting. Works in PLA but best to use PETG Fusion360 file available if you wish to mod to your liking
Tamperstation für La Pavoni Europiccola zur besseren Vorbereitung und Tampern.
2026-03-21: V2 with beefier legs Supportless print. You will need four screws that are longer than what came originally with the drone - M2 × at least 14 mm. Also four M2 nuts. Also print four of the spacers (STLs attached) and put them…
This thing replaces the front plate on a La Pavoni Jolly grinder to allow for directly collecting the grinds in a filter. It is in three parts, which might have to be modified individually. For example, the filter holder has a hole…
Print with TPU, use supports. Use at least 2 zip ties on each side. It should fit above the DJI O4. Glue the tinfoil on the back of the gps mount to improve electromagnetic separation from VTX - I have totally no evidence that it really…
Pavo 20 Pro, Dji 04 Air Unit Lite Adapter mount
TPU accessories designed for Pavo20 Walksnail 1s built use M2x12 to mount VTX to 20 - 25 TPU adapter use M2x6 to mount 20 - 25 TPU adapter to carbon adapter thread antenna holder through square hole at the back for Dipole antenna
Tool for removing or installing the piston sleeve in a LaPavoni lever coffee machine (millenium version). Includes a hole for screwdriver/hex key for additional torque. Print settings: Printed in PETG 0.20 mm layer heigth (0.20 mm…
Need to upgrade antenna on my CRSF Pavo35 but all support I found make the immortal T touch carbon, so I design this simple one. Reinforced to avoid touching carbone or blade. Should fit Pavo20 too
Protection de batterie pour les BetaFPV Lava 550 3S LiHV utilisées sur lesPAVO20Pro entre autres. Système d'accroche de la prise d'équilibrage inclus !!! A imprimer en TPU, 3 parois, 0.20 layer, nid d'abeille 3d 10% max d'infill pour…
I made this part because the original battery strap is too small and I lost my LiPo everytime I crash. I design this one and print it from TPU, even if fixed only by 4 small screws, I never lost it and the LiPo is perfectly maintain. I…
Print on: NYLON or PCTPE Layer Height: 0.15 includes a hole to place the xt30 connector more safely
Walksnail Moonlight VTX & Camera Mount for the Pavo 25V2. Camera: Camera mount assures free camera view with Filter. ND Filter is accessible. Camera angle ajustable in place. It holds a Goku nano GPS. I think that this build provides a…
That's my variant of the original canopy. I've added holder for 2 antennas and a GPS. Printed in TPU, will see how it holds. GPS used: Foxeer M10Q-120 ← this is my go to for small quads. Amazing performance.…
Custom mount for Thumb Pro W camera, weighting only 3g. Angle is 23 degrees, it's best for my use case. Print in TPU, best with organic supports ( at least in PrusaSlicer )
Parts for mounting an SSC30KQ IP camera to a Pavo20 frame. The parts are also designed to mount a battery on top. I included printable lens mounts: one for an M12 wide-angle lens, and one for a smaller lens taken out of a broken Runcam…
Designed to be easy to print with no supports or brim. Print at 90-100% infill with PLA+. You'll want the gummies in your unit. I found the easiest way was to use fine point tweezers to start them in the holes and then your fingers to…
A self leveling tamping station designed for the 49mm basket of a pre-millenium (generation 2) La Pavoni Lever Espresso machine. The basket sits flat in the base and the funnel screws on top. The funnel was designed with a straight…
To complete this build you need a brass boiler cap base which you can get from several places. I bought mine here: https://coffee-sensor.com/product/la-pavoni-lever-boiler-cap-base-in-brass/ The shaft need to be made in PC (polycarbonat)…
Objective I always wanted to know the grouphead temperature of my LaPavoni lever machine in order to remove the related guesswork and thus getting more consistent results. Unfortunatly all available solutions failed to match the general…
RunCam Thumb Pro V2 4K mount for BetaFPV Pavo 30
TPU Propguards for Pavo20 with PETG inserts for more stability, but still bouncy and resistant. this is a modification of this Pavo20-replica whoop duct https://makerworld.com/de/models/53282?from=search#profileId-57500 PETG survived some…
Replacement Mount for Pavo Light. Nice and tight fitting. Works in PLA but best to use PETG Fusion360 file available if you wish to mod to your liking
Extended HD camera mount for Pavo 25 providing better camera protection. Mount * 2 (Flip the mount for Right hand side) Stand off x2 M2 x 12 * 6 M2 hex nut * 2 Printing Not support required 95A TPU Installation 2 M2x12 screw and nuts for…
Ideal para hacer galletas, usar en manualidades de porcelana, cerámica, etc.
Tamper station for post millennium LaPavoni portafilters. There are three versions avaliable: Standard - Pictured (Height 65mm): The basket is slightly protruding above the upper surface Flat (Height 60mm): The lugs sit flat on the rim of…
Handle (Porta filter or Lever) for La Pavoni lever coffee machine - or any coffee machine that uses M12 female thread actually. I printed in PACF and it works well. Just something a little different and a little bit shorter than the…
This is my caddx polar vista camera mount design for pavo 25 v2 frame. It's design for wide fov.
3D-Printed Grid for Nanlite PavoTube II Upgrade your Nanlite PavoTube II with this custom-designed 3D-printed grid, perfect for shaping and directing your light with greater precision. The grid snaps easily onto the PavoTube II via clips,…
BetaFPV Pavo 20 HD VTX with 2 antennas mount fit for 25x25 mounting holes with better protection Inspired by design from @PePeStef_642916 https://www.printables.com/model/994978-cadre-pp-20p use M2 x 14 for mounting vtx Stock screws for…
корпус под walksnail 1s для pavo pico, камера сдвинута вниз и к центру, также фиксируется она крепче, нежели в стоковой рамке, всё под винты M2.
Pavo 25v2 Bottom Protection Pavo 25v2 Bottom Protection aus TPU Schütz die Drohne von unten
Pavo 25 v2 spacers for Walksnail mootnlight Schaffe distanz um die Moonlight im Pavo25v2 zu installieren.
holds the dji 03 vtx and camera used for pavo 20 and other ways to mount your vtx and camera
The Pavo Pico, Pavo20 and Femto from BetaFPV use the same VTX hole spacing so they are compatible. Not compatible with the Pavo20 Pro that is larger. The mount is around 2.8gr (depending on your print settings). The stock version (plastic…
Mount for DJI O4 Air Unit Pro for the Pavo20 Pro. VTX mount and camera canopy for The DJI O4 Pro specific for BetaFPV Pavo20. The canopy is designed for Heat set thread inserts (for use with the OEM screws), but it is also designed to…
Please Check the File Name there are 1~3mm thick and M2,M3 vtx Holes
Simplified BetaFPV Pavo Pico mount for O4 Air Unit (Lite) without carbon cross
this is an adapter mount for the Walksnail Avatar USB C for the BetaFPV Pavo25 v2 Cinewhoop Since I either lose the adapter cable, tear one of the cables when connecting it, or bend one of the tiny pins, I decided to permanently mount a…
LOW PROFILE EXTRA THICK DESIGNED IN FREECAD (WORLDS GREATEST CAD) UNTESTED PROCEED WITH CAUTION (UPDATE IN 3 DAYS)
New base for the portafilter from naked-portafilter.com for the 49mm La Pavoni or Olympia Cremina. I use it with the 14g precision basket with 22mm depth. I needed to cut the needles to a total of 40/50mm. Printed with PETG on Bambulab A1…
FPV Drone stand - Pavo Pico or others Dimensions The stand is 130 mm high . The slot for fitting the drone is 9mm . It is made for the Pavo Pico but I think it can fit other drone as well ! Printing It can be printed without support and…
Une boite de transport pour votre Pavo 20 Pro, monté avec un DJI O4 (Pro bien entendu…) Peut contenir : 1 Pavo 20 Pro, avec son O4 et ses antennes stock (qui prennent une place…) 6 LiPo 3S (4 fines type Lava, 2 épaisses style DogCom) 1…
Holder for Walksnail Avatar HD Kit V2 32G (single antenna version). The holder is designed so that supports are not needed (but it is good to at least manually adjust for the lower recess of the mounting screws. Printed with 0.4 filament,…
Uchwyt GPS BetaFPV Pavo Pico / Pavo20 / Femto BZ121
Stand, tripod, holder for nanlite pavotube 15C 30C
dji o4 air unit BetaFPV Pavo mount how it's look and fly https://youtu.be/lvUzVdcDgm8 use the included rubber vibration feet to mount the camera, having first inserted them into the holes for the camera screws. print TPU 95A
Little mount to combine Pavo 30 drone and gopro. Printed from Flexfill 98
A simple funnel for 49mm baskets that are used by the Olympia Cremina or older La Pavoni models. The funnel sits well on my 14g baskets without the need for magnets. It allows for WDT and tamping for minimal mess in the kitchen :) Printed…
Very simple tamper base station for the 49mm & 51mm naked-portafilter for Olympia Cremina and La Pavoni. It has just enough height to clear the portafilter handle from the ground and keeps it level even when not filled. Now parametric…
Printing This model consists of five seperate parts, each indicated by the leading number of the stl file. For parts 1 & 4 there are two version available, so pick one. All parts printed with 0.20 mm layer hight. Part 1 - Handle Print as…
BetaFPV Pavo Femto Storage Box – Remix of SnapLock Storage Boxes This is a remix of the SnapLock Storage Boxes (parametric) by Hugo, designed specifically to store the BetaFPV Pavo Femto drone along with four 450mAh Lava batteries . It…
Caja de Pluma de Pavo Real, para varios usos - Peacock Feather Box, for various uses. Parámetros de impresión Material: PLA Altura de Capa: 0.12mm Temperatura: 200°C Temperatura de cama de impresión: 60°C Relleno: 20% Soportes: No…
Print using PETG, TPU, or Nylon filament, mount using 2x15mm screws.
Für Bambu Lab nutzer habe ich das Druckprofil unter: https://makerworld.com/de/models/1239935-pavo-20-pro-dji-o4-mount-mount-lite#profileId-1260205 --------------------------- BETAFPV Pavo 20 Pro Mount für DJI O4 Air Unit (lite). Diese…
As the title says, a canopy/mount for the VTX/camera for a Emax Wyvernlink 100mw OpenIPC system for BFPV frames. Print at .16 optimal with at least 2 walls 3 top 3 bottom and 15% infill. with some pressure screws with thread in. I used…
This is cage for mounting o4 air unit lite on Betafpv Pavo 20 pro. To mount o4 Air unit lite you must use orignal bolts M2x4mm. There is also holder for o4 air unit lite antenna - use flat screw driver to open it and then place antenna.…
The main body of this canopy secures the antenna and camera to the frame. I printed this portion with PETG-CF, although any PETG or ABS should be fine. Use 4 m2 heat set inserts (up to 4mm tall) for the mounting holes. The TPU bumper is…
Provide a mounting location for the battery plug on the Pavo20 Pro and a storage location for the balance plug on the battery. There are 2 models. One is compatible with the LED strip and the other is not. Please check when you download…
Note: You'll have to cut out part of the side protection to get SD cards in and out and to reach buttons. should be easy and it makes the design flexible to multiple different configurations while still protecting all the way around.…
Pavo 20 Pro Runcam Wifilink 2 Canopy This is a custom-modeled canopy for the Pavo 20 Pro, designed to fit a Runcam Wifilink 2. Printing Recommendations: Material: PETG or PLA Infill: Minimum 15% Gyroid Layer Height: Maximum 0.2mm…
Case for DJI O4 Lite – Fits Perfectly in the Pavo 20 Pro Frame This custom case is designed specifically for the DJI O4 Lite and fits perfectly into the Pavo 20 Pro frame. All buttons, ports, and wires are easily accessible. It also…
The main body of this canopy secures the antennas and camera to the frame. I printed this portion with PETG-CF, although any PETG or ABS should be fine. Use 4x m2 heat set inserts (2 mm tall) for the mounting holes. The TPU bumper is…
This is a replacement VTX cage for the Pavo20 Pro frame. I bought the frame to build my own version using the Walksnail Moonlight Kit, since that’s the FPV system I prefer. The cage is fairly robust, with a dry weight on the drone coming…
3D-Printable Wall Mount for BetaFPV Pavo Femto Designed for easy installation, the mount includes pre-drilled holes (3mm) for screws or adhesive mounting. Print Settings Rafts: No Supports: No Resolution: 0,2mm Infill: 2-3 walls 100%…
Turn your pavo20 pro into a toothpick quad! This replaces the prop guard on the pavo20 pro with a battery holder, landing legs, and a mounting place for the battery connector. Print this part on its side for maximum strength Use 4x m2x4…
Here are a few 3D models I designed for the Pavo35 frame. To use them properly, you may need a few additional parts: Anti-jello rubbers – https://www.aliexpress.com/item/1005004834430551.html? M2 OD3.5 melting nuts (for the antenna…
This is a remixed and customized version of the original Rugged Box (Parametric) , modified specifically to fit and protect the BetaFPV Pavo Femto drone. The foam for the top cover was reused from the original packaging the drone was…
Protect Your Pavo 20 Pro Battery! (Fits 650mAh Tattu 3S 75C) Tired of worrying about your Pavo 20 Pro battery? This 3D-printed battery saver is the solution! It's specifically made for the Pavo 20 Pro and fits larger 650mAh Tattu 3S 75C…
This is a tool to assist with reinstalling the pistion back into the group head on La Pavoni espresso machines such as the Europiccola and the Professionale. It is designed to work with Millenium models (post 2000) not legacy models.
This is for a 49mm portafilter off of a Pre-Millenium La Pavoni Europiccola. I hung it to the wall with some double-sided tape or command strips. Simple and effective.
BetaFPV Pavo20 Case with LiPo and accessories slots. Dimensions So as said in the title It is made for a BetaFPV Pavo20 . The batteries I use are 3S 450mAh . If you would like other sizes, tell me ! The others solts in the top part are…
the holes may be slightly off, I handled it by placing the heated inserts in a way that mitigates that.
Pavo20 compatible. Custom design slightly heavier but printable without supports (just pot it up side down) no supports additional threaded insert needed (M2) I am using it on my custom 3.5" build and can be used on Pavo20 as well so that…
This is a lightweight 3D printed GPS mount designed specifically for the Foxeer M10Q-120 , an ultra-light GPS module, on the BetaFPV Pavo20 Pro frame. The mount provides a secure and clean installation while keeping the total weight…
The best printing position is upright and slightly diagonal, just let the slicer figure out the best position :-) Use supports, especially if you are printing with TPU. You will need loads of supports because the model is tall (upright),…
An adapter to install Eachine Sphere Link into Pavo20 Pro stock canopy. The stock canopy will need trimmed.
While I made this model completely from scratch, credit where credit is due. I got the inspiration from this particular model: https://www.printables.com/model/1231690-betafpv-pavo-femto-storage-femto The previous one was sized for 450mAh…
This is a damping mount for the O4 Pro camera. It’s meant to help with Gyroflow, especially when stabilization makes things look worse instead of better. You’ll need a few small foam dampers: just cut cylinders from firm foam (the kind…
I made this cage to protect BETAFPV LAVA 550 mAh 3S Li-Po batteries mounted on Pavo20 Pro. I was going to create a part to hold the annoying 3s balance cable in place but searched here and found a cage made by @DieselSLC which has a…
A tpu protection for the carbon bottom of the pavo 25v2 Print Settings Printer Brand: Creality Printer: Ender-3 V3 KE Rafts: Doesn't Matter Supports: Yes Resolution: 0.1 Infill: 25% Filament: sunlu tpu blue Category: R/C Vehicles
Pavo 25 v2 spacers fot walsknail moonlight 4k. its possible! Print Settings Printer Brand: Creality Printer: Ender-3 V3 KE Rafts: Doesn't Matter Supports: No Resolution: 0.1 Infill: 25% Filament: sunlu Pla or PETG black Category: R/C…
This is a Protection for the carbon on the bottom side for the pavo 25v2 whoop drone Category: R/C Vehicles
Highlights Weight-optimized at only 7 grams Covers the camera module from three sides at full tilt range (0-30deg) Two 3.5mm antenna mounts accommodate your favourite CP antennas Optional lightweight arms to use with simple dipoles that…
Ein passender Tamper für die La Pavoni Europiccola und andere Maschinen ab 2005 mit passendem Durchmesser 51,5 mm. Gedruckt in ABS, sollte aber mit jedem Material funktionieren, außer natürlich TPU.
Tamperstation für La Pavoni Europiccola zur besseren Vorbereitung und Tampern.
Printed off gigi's version of the funnel and had issues with the bottom breaking sometimes because of how thin the bottom section is. I am learning Fusion and thought, I can make that and make it thicker so it will be more robust. Printed…
Pavo 20 Pro Nightfire Limited Edition Canopy for Walksnail Moonlight VTX. Please note that i have not tested the Nighfire version yet. Please provide feedback if you happen to print it before i do. Category: Other
Case for Pavo Femto with 4x 450mah BetaFPV Lava batteries without gap between the bottom and the top parts.
A custom tool designed to remove the boiler flange nut/ring on La Pavoni machines (part no. 31104702). Perfect for safe and easy disassembly without damaging components. Printed in PETG (0.4 mm nozzle, 0.3 mm layer height, 5 wall loops,…
