Pavo Pico frame w/ legs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Frame/Duct/Propeller guard for the BetaFPV Pavo Pico drone
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 216
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
2026-03-21: V2 with beefier legs
Supportless print.
You will need four screws that are longer than what came originally with the drone - M2 × at least 14 mm. Also four M2 nuts.
Also print four of the spacers (STLs attached) and put them between the frame and the duct, one under each screw (this was necessary to make the model supportless).
I've also made this neat-ish battery holder system that prevents the batteries from sliding when attached just with a velcro. Simply print “batteryHolder.stl” for each of your batteries and attach it with a double sided tape.
I've also made a case for the drone for this specific duct.