1 / 3
Emax Wyvernlink OpenIPC Mount for Pavo Femto/Pico/Pavo20 — zdjęcie 1
1 / 3

Emax Wyvernlink OpenIPC Mount for Pavo Femto/Pico/Pavo20

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Emax Wyvernlink 100mw OpenIPC Mount for Pavo Femto/Pico/Pavo20

Ocena
0 / 5
Polubienia
4
Pobrania
55
Wydruki
0
Wyświetlenia
486
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

As the title says, a canopy/mount for the VTX/camera for a Emax Wyvernlink 100mw OpenIPC system for BFPV frames. Print at .16 optimal with at least 2 walls 3 top 3 bottom and 15% infill. with some pressure screws with thread in. I used the stock gummies for the VTX and short M2 screws to mount the canopy. Two small zip ties used for the antennas. 

M1.4 4mm screws used for camera since Emax decided to be weird

Tagi