P
Printables
M12 LENS CAMERA BODY OPENIPC
Use 3mm diameter, 3mm deep heat inserts on the sides. Printing: Layer thickness should be 0.1mm for the threads to print correctly.
Wyniki wyszukiwania: openipc
Liczymy pasujące modele…
P
Printables
OpenIPC RubyFPV Runcam camera base plate mounting
OpenIPC RubyFPV Runcam camera base plate mounting
P
Printables
OpenIPC Radxa Zero 3W VRX case -- 3x EU RX cards w/ HDZero rail mounting
A model to mount a Radxa Zero 3W running OpenIPC onto the HDZero Goggles. Space for 3x 8812EU rx wifi cards and 6 sma antenna holes.
P
Printables
OpenIPC Radxa zero 3w VRX / single rtl8812eu2 wifi card case 2026
한개의 wifi 카드만 사용한 VRX 케이스 입니다.
P
Printables
OpenIPC Thinker 14x14 camera covert to 19x19mm mount dock add ND filter dock
OpenIPC 14x14 camera covert to 19x19mm mount dock add ND filter dock
P
Printables
OpenIPC Mario AIO drone mount 30mm
This mount allows to install OpenIPC Mario AIO VTX to a drone with 30x30mm VTX mount holes. You will need: 4x M2 nuts (4mm wide) 4x M2 x 12mm bolts (to attach mount to VTX) 4x M2 x 8mm bolts (to attach mount to 3mm carbon frame)
P
Printables
OpenIPC mario sensor 14x14 mm board case
OpenIPC mario sensor 14x14 mm board case Use ‘Dark color’ PLA print
P
Printables
OpenIPC Radxa Zero 3W HDMI ground station
Self-locking (no screws needed to close it). WiFi module USB connector is hidden inside the box (no dangling wires), but requires modified (5.1k resistor) "MX-12" 90° USB-C connector. Radxa and cooler are screwed with M2 bolts (5mm for…
P
Printables
OpenIPC SSC30KQ IP camera mount for the Pavo20 frame
Parts for mounting an SSC30KQ IP camera to a Pavo20 frame. The parts are also designed to mount a battery on top. I included printable lens mounts: one for an M12 wide-angle lens, and one for a smaller lens taken out of a broken Runcam…
P
Printables
Radxa zero 3w case for OpenIPC
It's a super thin design in order to lose some weight. And a mount for skyzone goggles. You need five 2x16mm screws and five 3.5-4mm height copper injection nuts . I've also cutted a camera control board to be the “buttons”. The fan is…
P
Printables
OPENIPC MARIO AIO HOLDER WITH PANNING SERVO
A NICE LITTLE HOLDER FOR YOUR CAMERA WITH PANNING SERVE - MG90S
P
Printables
OPENIPC COMPACT MARIO AIO HOLDER FOR FPV
Sliding rails are 54mm apart ( external dimension. And are 2mm thick. Your planes slider rail sould be 3mm deep, 2.2mm tall. Fusion file included.
P
Printables
OpenIpc Thinker mount frame for 8812af1/8812cu3 wifi card
OpenIpc Thinker mount frame for 8812af1/8812cu3 wifi card PLA print
P
Printables
OpenIPC Thinker mount frame for 88EU2 wifi card
OpenIPC Thinker mount frame for 88EU2 wifi card
P
Printables
OpenIPC GS Radxa zero VRX Case
Radxa zero 3w x1 wifi card - RTL8812AU AF1 x2 USB hub x1 40mm cooling fan(5v) x1 5v dc step down x1 3.3v dc step down x1 switch x1 button x1
P
Printables
OpenIPC PixelPilot FPV goggles for Android phone
These are essentially phone VR goggles but designed with a “module bay” for a wifi module for connecting to a phone. I will add more pictures later. Assembled with M2 screws and nuts. Here is what it looks like: Assembly tutorial:
P
Printables
OpenIPC RubyFPV VRX WITH DISPLAY AND BRACKET FOR RADIOMASTER BOXER
OpenIPC RubyFPV VRX WITH DISPLAY AND BRACKET FOR RADIOMASTER BOXER Allows to mount a HDMI 1080p display Fits in the original radiomaster boxer carrying case - no disassembly required Easy assembly Can hold over 800 grams of weight Model…
P
Printables
M12 LENS CAMERA BODY OPENIPC
Use 3mm diameter, 3mm deep heat inserts on the sides. Printing: Layer thickness should be 0.1mm for the threads to print correctly.
P
Printables
OpenIPC Ruby_FPV Radxa GS
This is GS model for OpenIPC and Ruby_FPV based on RADXA zero 3W and 2 M8812EU2 with dedicated location for each component
P
Printables
openIPC PRO V1 VRX (Radxa+Dual 8812EU)
My first version of my openIPC VRX. Used parts: -JLCPCB Board (my own creation) -2x Tps54560 StepDown Boards (only for some parts) -2x FAN “SEPA HZ25B05” -2x RTL8812EU -4x SMA connector -1x 5-WAY SWITCH -1x Radxa Zero3W -1x USB hub FE1.1s…
P
Printables
OpenIPC RubyFPV Runcam camera base plate mounting
OpenIPC RubyFPV Runcam camera base plate mounting
P
Printables
iSpy: Another OpenIPC SBC VRX Case
About: Use the hdzero rails from this model: https://www.printables.com/model/811132-openipc-radxa-zero-3w-hdzero-goggle-case-rail-moun/files I glue the two halves shut with my soldering iron… I made this in autodesk fusion, I am not a…
P
Printables
Radxa Zero 3w OpenIPC RubyFPV VRX / Groundstation
updated - SD card is now accessible from the rear This is a case that holds a Radxa zero 3w and two BL-M8812EU2 wireless radios, intended for use with OpenIPC/RubyFPV on a set of goggles. Please disregard the antennas used, I'm waiting on…
P
Printables
My OpenIPC & RubyFPV VRX Case Radxa Zero 3W V2
Radxa ZERO 3W 4GB 32GB EMMC x1 https://aliexpress.ru/item/1005006677319461.html?spm=a2g2w.orderdetail.0.0.44404aa6RrHdEu&sku_id=12000039038015030 MP1584EN 3А x1…
P
Printables
The Crown: Radxa SBC OpenIPC Ground Station 3x EU2 6 Antenna VRX
This is a tough tight build. Edit: Backplate v2 has 2 more millimeters of depth, the side SMA ports adjusted, the ¼" screw threading extended, and exhaust cooling in the back. The extendo is 4 additional mm to make adding 20x20x10mm…
P
Printables
OpenIPC Radxa Zero 3W VRX case -- 3x EU RX cards w/ HDZero rail mounting
A model to mount a Radxa Zero 3W running OpenIPC onto the HDZero Goggles. Space for 3x 8812EU rx wifi cards and 6 sma antenna holes.
P
Printables
OpenIPC Ruby_FPV GS Radxa zerro 3w based
OpenIPC Ruby_FPV GS Radxa zerro 3w based this is V2 model more light no screws
P
Printables
Emax Wyvernlink OpenIPC Mount for Pavo Femto/Pico/Pavo20
As the title says, a canopy/mount for the VTX/camera for a Emax Wyvernlink 100mw OpenIPC system for BFPV frames. Print at .16 optimal with at least 2 walls 3 top 3 bottom and 15% infill. with some pressure screws with thread in. I used…
P
Printables
Radxa Zero 3W - OpenIPC Groundstation
I just used PLA with regular supports. The top piece has a decent amount that can be a little tricky to use. It uses a gopro mount btw Probably most of the parts: Radxa zero 3W (with heatsink) ufl → sma connectors x4 40mm fan some random…
P
Printables
radax 3c case for openIPC FPV ground
A box for placing the openIPC FPV ground terminal, with a built-in RTL8812EU network cable card and external antenna interface, built-in 18650*2 battery and charging port, and a sliding door on the charging port. There are corresponding…
P
Printables
OpenIPC Evolution AIO bottom bracket
Evolution AIO bottom bracket. Use 2mm self tapping screws
P
Printables
Smaller Openipc/Ruby FPV Bonnet VRX Box based on Wojciech's design
Based on Wojciech's design
P
Printables
Case for Radxa and OpenIPC Bonnet
Another case for the Radxa and OpenIPC Bonnet. Fits a 10mm 20x20 fan. If you use the same DC barrel connector you need to cut away a piece of the rubber so that the antenna pig tail fits in the hole.
P
Printables
OpenIPC based FrSky X14 Ground station / Display mount
As an alternative to goggles, a display seemed to be the solution for FPV setup. But flying outside requires a high brightness display. I found a nice and affordable display on AE with 2000nits. I also wanted to mount it on my FrSky x14…
P
Printables
BetaFPV VR02 for RubyFPV and OpenIPC
Reworking a BetaFPV VR02 helmet for RubyFPV and OpenIPC
P
Printables
TrueRC X-Air Antenna Mount for OpenIPC Runcam WifiLink VRX
Even though the WifiLink VRX strongly resembles the HDZero VRX and has similar looking rails, it appears to be a different size. This mount slides onto the WifiLink front rails, holds the TrueRC X-Air. Print vertically with a brim, no…
P
Printables
Openipc FPV Ruby fpv VRX ORV2
Most compact VRX for Openipc FPV and ruby FPV Radxa zero 3w 1gb no emmc BL-R8812AF1 NIC 4x m2x10 standoffs 4x m2x10 screws 25 to 5V bec 5v to 3v bec 10v 220uf cap 20x20x5 8000rpm fan 5v 6x push buttons jumper cables shielded wire for NIC…
P
Printables
OpenIPC Radxa zero 3w VRX Case
VRX case using 2 Wi-Fi cards m8812eu2. Radxa zero 3w x 1 Bec 5V 3A (for radxa zero) x 1 Bec 5V 5A (for two wifi card) x 1 BL-M8812EU2 wifi card x 2 usb-hub module x 1 on/off switch x 1 recoding push button x 1 etc.
P
Printables
OpenIPC Radxa zero 3W VRX for Eachine EV200D goggle final version
This is the OpenIPC VRX case model. It has been designed specifically for the Eachine EV200D goggles, with no consideration for other products' goggles. Since the goal was to achieve a compact size, a smaller BEC must be used to fit into…
P
Printables
OpenIPC / Ruby FPV compact goggle mounted VRX - Bonnet Based.
BOM: Radxa 3W, with soldered header OpenIPC Bonnet 4 x IPEX to SMA or RPSMA, 2x 5cm and 2x 10cm 5.5 x 2.1mm power barrell jack plug and socket 30mm x 10mm 5V fan Micro HDMI to HDMI cable USBC female socket
P
Printables
OpenIPC Radxa zero 3w VRX / single rtl8812eu2 wifi card case 2026
한개의 wifi 카드만 사용한 VRX 케이스 입니다.
P
Printables
hi3536d nvr box for openipc
Print any filament, 0.5 width and mount nvr. Cover2 for mount rtl8812au 150mw reciever. Drill holes for ant where you need.
P
Printables
WIP OpenIPC NVR FPV/HiSilicon HI3536D Fan Case and Lid
WIP model of my NVR Case for use with OpenIPC FPV and Ground Stations. This case is a remix of W's case that he posted on the OpenIPC Telegram page. Thx for getting me started. This case features the following: 50x50x10mm 12v fan slot,…
P
Printables
OpenIPC Radxa Zero 3W HDZero Goggle case rail mount
A model to mount a Radxa Zero 3W running OpenIPC onto the HDZero Goggles
P
Printables
OpenIPC Pavo20 compatible camera housing
Use brass inserts ~3mm M2 for Pavo20 compatibility. M2,3 self tapping screws for assembly of parts. Allows up to 20degrees of camera angle. Fully modular, can for example make your own CameraHolder to adapt. Camera module is very…
P
Printables
ActionCam OpenIPC
Space made for a Mini DC-DC 12-18V To 5V 3A Step Down Power Supply Module Voltage Buck Converter.
P
Printables
OpenIPC 38x38 Pavo20Race
Body for Pavo20 to house 38x38 modules. Tested with Anjoy ssc338q and ssc30kq
P
Printables
Another OpenIPC Radxa GS case
(Work in Progress) I am making another version (v2) that will have enough room for 2 RTL8812AU's and the front cover with rails for patch antennas clips that also fit on HDZero Rail System. changes in V2 removed 3 holes on top add wider…
P
Printables
OpenIPC 338Q camera case
OpenIPC 338Q camera case, holders and wifi compatibility will be add soon
P
Printables
A case for the OpenIPC GS
This is a simple case for the OpenIPC (Ruby, wfb-ng) ground station based on Radxa Zero 3W and a cheap RTL8812AU WiFi adapter. It is suitable for Skyzone Sky03 Googles and can be attached using double-sided tape.
P
Printables
OpenIPC RunCam WiFiLink bracket.
This bracket is made to address the issue of pendulum fastening of WiFi module of RunCam WiFiLink OpenIPC unit. It has 3 modifications for different antenna placements. It can be carefully put on without any disassembly or disconnections.…