1 / 4
OpenIPC based FrSky X14 Ground station / Display mount — zdjęcie 1
1 / 4

OpenIPC based FrSky X14 Ground station / Display mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mount a display and the VRX to your FrSky x14 to make your portable ground station.

Ocena
0 / 5
Polubienia
4
Pobrania
15
Wydruki
0
Wyświetlenia
423
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

As an alternative to goggles, a display seemed to be the solution for FPV setup. But flying outside requires a high brightness display. I found a nice and affordable display on AE with 2000nits. I also wanted to mount it on my FrSky x14 without drilling holes. Here is the result of my journey.

Needed parts:

  • VRX
  • Display
  • 1300mAh 3s LiPo
  • some 5.5x2.1mm dc connectors
  • connector that fits your LiPo connector
  • 2x M3x35
  • 2x M3x25
  • 4x M3x4x4.2 Hot melt insert nuts, I bought this kit.
  • some Velcro One Wrap
  • some cable ties

I added the fusion file in case you need to adjust some dimensions. Might be handy if you want to fit a different screen.

Tagi