OpenIPC RunCam WiFiLink bracket.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracket to hold the floating side of 8812Eu2 module of OpenIPC RunCam WifiLink unit.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 686
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This bracket is made to address the issue of pendulum fastening of WiFi module of RunCam WiFiLink OpenIPC unit. It has 3 modifications for different antenna placements. It can be carefully put on without any disassembly or disconnections.
“Straight” one is for leading antenas thru one side, and does not allow them to be spread out, but they can be crisscrossed, so lose some length, but be plased on sides. It is the basic model that was made first, and can be used in most cases.
"Sides" version is for spreading antennas to the sides thus giving maximum wideness of placement. But this config is not so rigid, so is not recomended.
“Crossed” version does not allow any placement of antena feeders exept the crossed one, but has most rigid construction. It is recomended for freestile or other tense usecases.
The clearence is a bit big, so if you have loose fit, please use duct tape or some other isolating dampening materials to place PCBs securely.
I used PETG filament (most cheap and oozy that i have) and it came out pretty strudy.
Feel free to modify the model for your needs, it was created in blender, so nothing exept STL does not exist.
If someone asks, I do not mind if RunCam will include this little 1 gramm 7 minute print thing as a gift with their nice little camera)).