OpenIPC RubyFPV VRX WITH DISPLAY AND BRACKET FOR RADIOMASTER BOXER
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A VRX that can be used to display OpenIPC and RubyFPX video stream. Make sure you follow FAILSAFE-FPV on Youtube
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 162
- Wydruki
- 0
- Wyświetlenia
- 1133
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
OpenIPC RubyFPV VRX WITH DISPLAY AND BRACKET FOR RADIOMASTER BOXER
- Allows to mount a HDMI 1080p display
- Fits in the original radiomaster boxer carrying case - no disassembly required
- Easy assembly
- Can hold over 800 grams of weight
Model consists of 7 files:
- Radiomaster boxer bracket
- Display bracket
- Body
- Lid
- Button ( print 2)
- Rails Screen
- Rails VRX
RM BOXER BRACKET
Use two screws holding the strap to secure the mounting bracket
You will need a hex nut with rounded head and a GoPro fastener co connect two brackets
The Radio antenna goes through a hole in the back. Tighten by hand.
DISPLAY BRACKET
- designed to work with the display linked below specifically.
- Has 4 holes for mounting rails that will connect a VRX on the back
PRINTNG GUIDELINES
Tested with PLA.
If the display doesn't fit, that means the model shrunk after cooling down. If this occurs, scale by 0.3% in X and Y axis in your slicer.
Use Honeycomb infill, 25% for extra strength.
Use supports for overhang next to 5V opening.
Cut the two little tabs by the button on the top of the display bracket with exacto knife.
Print the boxer bracket on the back face.
🛠 TOOLS AND MATERIALS (affiliate links):
- Radxa 3W
- RTL8812EU2 WiFi module
- 5" HDMI display
- 1/4" heat inserts
- Metric Heat inserts
- Countersunk screws, M3 6mm
- Flexible HDMI to HDMI micro cable
- USB hub module
- 3A adjustable DC step down module
- Screws
- SMA female to Ipex cables (7cm)
- 5 way switch
- Male USB C
- On Off switch
- Antennas
- 2507 5v fan
If you want to say thank you for this model, you can buy me a coffee here: