1 / 2
Vaccuum Desoldering Pump (WIP)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a work in progress model to recreate the hakko desoldering gun for under $75 with a foodsaver pump.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 207
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
There are no assembly instructions yet. Here is what you need:
- Yellow Boi(hard to find now)
- Food saver or other vacuum pump that takes 6mm OD tubing
- {{3d Printed parts}}
- 6MM ID O-ring (1.5mm) (this is a #5 in freedom units)
- 9MM ID O-ring (2mm) (this is a #9 in freedom units)
- About 2M of wire
- A microswitch of some variety
- 12v AC adapter(find one, don't buy one)
- about 1m of 6mm OD tubing(1/4in)
- brass or steel wool to stuff the tube
you need to be able to make accurate, air tight parts. resin printing is recommended or resin coated fdm prints.
freecad sources are included.