1 / 2
Vaccuum Desoldering Pump (WIP)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a work in progress model to recreate the hakko desoldering gun for under $75 with a foodsaver pump.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 207
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
There are no assembly instructions yet. Here is what you need:
- Yellow Boi(hard to find now)
- Food saver or other vacuum pump that takes 6mm OD tubing
- {{3d Printed parts}}
- 6MM ID O-ring (1.5mm) (this is a #5 in freedom units)
- 9MM ID O-ring (2mm) (this is a #9 in freedom units)
- About 2M of wire
- A microswitch of some variety
- 12v AC adapter(find one, don't buy one)
- about 1m of 6mm OD tubing(1/4in)
- brass or steel wool to stuff the tube
you need to be able to make accurate, air tight parts. resin printing is recommended or resin coated fdm prints.
freecad sources are included.