1 / 2
Magnetic Mani Wand Stand for Magnetic Nail Polish — zdjęcie 1
1 / 2

Magnetic Mani Wand Stand for Magnetic Nail Polish

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Stand to hold magnet wands for magnetic nail polish. Wands from Holo Taco and I Scream Nails.

Ocena
5 / 5
Polubienia
15
Pobrania
119
Wydruki
0
Wyświetlenia
915
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Inspired by @HanStudios_2167347's Nail Magnet Holder.  I wanted to add functionality to the design so I made this model from scratch based on the dimensions of the magnetic wand from Holo Taco and I Scream Nails, and added another holder in parallel.

This design is intended to function both for velvet and cat eye effects (capable of magnetizing two nails at once for the latter).  This stand is designed to use two wand magnets with rectangle magnet size 10mmx25mmx4mm (the size that Holo Taco, I Scream Nails offers, NOT the Mooncat size which is smaller - Cirque Colors and ILNP tbd size information).

The middle of the stand holding the wand stem is designed with a bit of taper at the top so that the wands 'snap' into place and doesn't fly out and snap together.  HOWEVER, the tolerances of every printer/material varies so some ways to tweak the fit:

  • If it is too tight and threaten to damage the wand, take a file to the tightest spot
  • If it is extremely loose, wedge a piece of tape
  • If it is slightly loose/loosens over time, add thin coats of TC on the inside

You may need to adjust the height your finger rests at depending on the thickness of your finger.  Some adjustment is possible by simply flipping the wands (magnet side down/up).

Tagi