1 / 3
Prusa MK4 Screen Bumper for original Prusa MK4 Enclosure with USB-Holder — zdjęcie 1
1 / 3

Prusa MK4 Screen Bumper for original Prusa MK4 Enclosure with USB-Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Prusa MK4 Screen Bumper for original Prusa MK4 Enclosure with USB-Holder

Ocena
0 / 5
Polubienia
9
Pobrania
28
Wydruki
0
Wyświetlenia
296
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Utilize a USB extension to save the built-in USB port from wear and tear.

 

Mounts around the LCD screen directly on the enclosure without having to remove it. Requires Qty.2 of M4 12mm screws

Suggested print settings for Prusa XL:
 - 0.20mm Speed
 - Prusament PETG
 - Infill density 20%
 - Infill pattern Grid
 - 3 Perimeters
 - Supports required (under USB port cavity)

Orient the part so it prints flat on it's bottom.

Tagi