1 / 3
Charging stand for Carneo Guardkid+ 4G Ultra smartwatch — zdjęcie 1
1 / 3

Charging stand for Carneo Guardkid+ 4G Ultra smartwatch

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This stand includes a slot specifically designed to hold the magnetic charger connector securely in place.

Ocena
0 / 5
Polubienia
5
Pobrania
45
Wydruki
0
Wyświetlenia
265
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This stand has a slot designed for the magnetic charger connector and cable, providing a secure place to charge Carneo Guardkid+ 4G Ultra smartwatch.

Decorative Details: It uses pieces of 1.75mm filament as decoration. Cut the inner pieces to approximately 41mm and the outer pieces slightly longer, around 43mm.

Assembly Tips: If using PLA filament, place the pieces on the printer's heated bed at 80°C for a few minutes until they soften. Once softened, you can bend them as desired and insert them into the designated holes before they cool down. More flexible filament materials may not require heating for this step.

If the charger connector fits loosely, apply a small piece of masking tape around it to create a snug fit.

Tagi