Simple Bambu Labs Clip-On AMS PTFE Input Buffer / Straightener
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A snap-on clip that straightens out the PTFE tube going into the single AMS hub on the back on X1/P1 series printers
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 394
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
When I moved my AMS from the top of the unit to the table level of the printer, I kept getting feed errors going into the hub on the back of the printer from the angle of the PTFE tube. I couldnt find a simple one that I liked, so I made my own. This is a simple clip-on piece that helps straighten out the tube going into the hub input.
It simply clips onto the AMS hub connector and then the PTFE tube. Ive been using it for a month now with no issues, so I decided to share!
I mainly use a .6 nozzle so that along with .3 layers is what I printed at. I used some not dry enough PETG HF so there are some imperfections. But it should print very easily on any printer, in any filament!
Also Included is a short version, but I find the taller ones works better.
Cheers, and thanks for looking!