Ender 3 - Sherpa Mini Extruder Mount for V6 hotend
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount adapter for the Sherpa extruder for use with an E3D V6 (or generic) hotend
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 102
- Wydruki
- 0
- Wyświetlenia
- 924
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This mix allows mounting the Sherpa-series extruders to the Ender 3 when using an E3D V6 (or generic clone) hotend. These hotends tend to mount further away from the plate, thus require the extruder to sit a bit more towards the front than the stock MK8 extruder.
(I used this mount for the V6 hotend: https://www.thingiverse.com/thing:3331545 )
(Thanks to @UmairHaque_843721 for pointing out the incorrect link)
I printed this using PETG at 0.2mm layer height and 20% gyroid infill with 3 walls and 4 top/bottom layers. Before installing, ensure to drop two heat inserts on the mount side ("bottom" once installed) to screw down the extruder itself.
Note: I tested this with the Sherpa Mini and the Sherpa Heavy, both fit as expected. I don't have any other Sherpa extruders to test with.