Ender 3 - Sherpa Mini Extruder Mount for V6 hotend
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mount adapter for the Sherpa extruder for use with an E3D V6 (or generic) hotend
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 102
- Makes
- 0
- Views
- 924
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
This mix allows mounting the Sherpa-series extruders to the Ender 3 when using an E3D V6 (or generic clone) hotend. These hotends tend to mount further away from the plate, thus require the extruder to sit a bit more towards the front than the stock MK8 extruder.
(I used this mount for the V6 hotend: https://www.thingiverse.com/thing:3331545 )
(Thanks to @UmairHaque_843721 for pointing out the incorrect link)
I printed this using PETG at 0.2mm layer height and 20% gyroid infill with 3 walls and 4 top/bottom layers. Before installing, ensure to drop two heat inserts on the mount side ("bottom" once installed) to screw down the extruder itself.
Note: I tested this with the Sherpa Mini and the Sherpa Heavy, both fit as expected. I don't have any other Sherpa extruders to test with.