Sovol SV08 Parametric magnetically attached Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sovol SV08 Parametric magnetically attached EnclosureThe main design goals were following:panels must be quickly…
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 781
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Sovol SV08 Parametric magnetically attached Enclosure
The main design goals were following:
- the panels must be quickly removable (for printing PLA and for doing maintenance on the printer)
- the printer itself remains unmodified (no drilling of holes, etc)
- the door must close without any big gaps
The top raiser and top panel design has been already been published as a separate design earlier.
https://www.printables.com/model/1035469-sovol-sv08-fully-closed-raiser
Required printed parts:
- BottomHinge.stl (1x)
- BottomMagnetDoorRestCorner.stl (1x)
- BottomMagnetDoorRestMid.stl (1x)
- DoorGapFiller.stl (1x)
- DoorKnob.stl (1x)
- FilamentGuideDistancePiece.stl (1x)
- MagnetHolderRearHorizontalBottom.stl (1x)
- MagnetHolderRearHorizontalTop.stl (1x)
- MagnetHolderRearVertical.stl (1x)
- MagnetHolderRearVerticalMirrored.stl (1x)
- MagnetHolderSideHorizontalBottom.stl (2x)
- MagnetHolderSideHorizontalTop.stl (1x)
- MagnetHolderSideHorizontalTop_withFilamentGuideHole.stl (1x)
- MagnetHolderSideVertical.stl (2x)
- MagnetHolderSideVerticalMirrored.stl (2x)
- TopHinge.stl (1x)
- TopHingeHolder.stl (1x)
- TopMagnetDoorRestCorner.stl (1x)
- TopMagnetDoorRestMid.stl (1x)
- WindowFrame.stl (2x)
Other parts (I used cheap wood):
- DoorPanel.stl (1x) (5 mm thickness)
- LeftSidePanel.stl (1x) (3 mm thickness)
- RearPanel.stl (1x) (3 mm thickness)
- RightSidePanel.stl (1x) (3 mm thickness)
Required other parts:
- flat hex head screws m3x4 (27x)
- normal hex head screws m3x6 (6x) (top hinge holder, top magnet door rest holders)
- normal hex head screws m3x12 (2x) (door hinges)
- magnets 8x3 (104x)
- metal round plate 10x0.4 (104x)
- acrylic glass 300x300x5
Some non-affiliated links to parts I used:
double sided tape: https://nl.aliexpress.com/item/1005005665913515.html?spm=a2g0o.order_list.order_list_main.190.acb679d2zrHh46&gatewayAdapt=glo2nld
acrylic glass: https://nl.aliexpress.com/item/1005007705572607.html?spm=a2g0o.order_list.order_list_main.204.acb679d2zrHh46&gatewayAdapt=glo2nld
Category: 3D Printer Accessories