Sovol SV08 Parametric magnetically attached Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sovol SV08 Parametric magnetically attached EnclosureThe main design goals were following:panels must be quickly…
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 44
- Makes
- 0
- Views
- 782
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
Sovol SV08 Parametric magnetically attached Enclosure
The main design goals were following:
- the panels must be quickly removable (for printing PLA and for doing maintenance on the printer)
- the printer itself remains unmodified (no drilling of holes, etc)
- the door must close without any big gaps
The top raiser and top panel design has been already been published as a separate design earlier.
https://www.printables.com/model/1035469-sovol-sv08-fully-closed-raiser
Required printed parts:
- BottomHinge.stl (1x)
- BottomMagnetDoorRestCorner.stl (1x)
- BottomMagnetDoorRestMid.stl (1x)
- DoorGapFiller.stl (1x)
- DoorKnob.stl (1x)
- FilamentGuideDistancePiece.stl (1x)
- MagnetHolderRearHorizontalBottom.stl (1x)
- MagnetHolderRearHorizontalTop.stl (1x)
- MagnetHolderRearVertical.stl (1x)
- MagnetHolderRearVerticalMirrored.stl (1x)
- MagnetHolderSideHorizontalBottom.stl (2x)
- MagnetHolderSideHorizontalTop.stl (1x)
- MagnetHolderSideHorizontalTop_withFilamentGuideHole.stl (1x)
- MagnetHolderSideVertical.stl (2x)
- MagnetHolderSideVerticalMirrored.stl (2x)
- TopHinge.stl (1x)
- TopHingeHolder.stl (1x)
- TopMagnetDoorRestCorner.stl (1x)
- TopMagnetDoorRestMid.stl (1x)
- WindowFrame.stl (2x)
Other parts (I used cheap wood):
- DoorPanel.stl (1x) (5 mm thickness)
- LeftSidePanel.stl (1x) (3 mm thickness)
- RearPanel.stl (1x) (3 mm thickness)
- RightSidePanel.stl (1x) (3 mm thickness)
Required other parts:
- flat hex head screws m3x4 (27x)
- normal hex head screws m3x6 (6x) (top hinge holder, top magnet door rest holders)
- normal hex head screws m3x12 (2x) (door hinges)
- magnets 8x3 (104x)
- metal round plate 10x0.4 (104x)
- acrylic glass 300x300x5
Some non-affiliated links to parts I used:
double sided tape: https://nl.aliexpress.com/item/1005005665913515.html?spm=a2g0o.order_list.order_list_main.190.acb679d2zrHh46&gatewayAdapt=glo2nld
acrylic glass: https://nl.aliexpress.com/item/1005007705572607.html?spm=a2g0o.order_list.order_list_main.204.acb679d2zrHh46&gatewayAdapt=glo2nld
Category: 3D Printer Accessories