CR10 V2/V3 Hemera XS, PINDA and ADXL Mount (2nd version)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows for the attachment of an E3D Hemera XS, PINDA Probe and ADXL Accelerometer to a CR10 V2 (or V3)
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 234
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Allows for the attachment of an E3D Hemera XS, PINDA Probe and ADXL Accelerometer to a CR10 V2 (or V3)
The pictured fan duct is this one: (It works very well) https://www.printables.com/model/335053-hemera-xs-5015-fan-duct
M3 x 6mm heatset inserts are required to use this model, their locations are pictured above. Highly recommend printing this in PETG or even better with ABS.
This design has a channel running through the middle to feed the Revo heater core's cables through. PINDA Probe is nice and close to the hot end so probing is nice and accurate. Cables are kept out of the way of the filament path, so no risk of it rubbing against any cables over time. The Extruder gear is also covered up, so it won't grind away at any cables.
Thank you E3D for the Hemera XS Reference model at: https://www.printables.com/model/713378-e3d-revo-hemera-xs-reference-cad
And to Bear on Printables for the X Axis carriage model: https://www.printables.com/model/205016-cr-10-v2v3-x-axis-carriage/files
Both were great to use as reference to design this mount.
There are two extra holes just above where the Hemera motor sits for two extra heat sets, this is for any future upgrades. Like a filament sensor or something.