1 / 5
CR10 V2/V3 Hemera XS, PINDA and ADXL Mount (2nd version) — image 1
1 / 5

CR10 V2/V3 Hemera XS, PINDA and ADXL Mount (2nd version)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Allows for the attachment of an E3D Hemera XS, PINDA Probe and ADXL Accelerometer to a CR10 V2 (or V3)

Rating
0 / 5
Likes
0
Downloads
13
Makes
0
Views
234
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Allows for the attachment of an E3D Hemera XS, PINDA Probe and ADXL Accelerometer to a CR10 V2 (or V3)

The pictured fan duct is this one: (It works very well) https://www.printables.com/model/335053-hemera-xs-5015-fan-duct

M3 x 6mm heatset inserts are required to use this model, their locations are pictured above. Highly recommend printing this in PETG or even better with ABS.

This design has a channel running through the middle to feed the Revo heater core's cables through. PINDA Probe is nice and close to the hot end so probing is nice and accurate. Cables are kept out of the way of the filament path, so no risk of it rubbing against any cables over time. The Extruder gear is also covered up, so it won't grind away at any cables.

Thank you E3D for the Hemera XS Reference model at: https://www.printables.com/model/713378-e3d-revo-hemera-xs-reference-cad

And to Bear on Printables for the X Axis carriage model: https://www.printables.com/model/205016-cr-10-v2v3-x-axis-carriage/files

Both were great to use as reference to design this mount.

There are two extra holes just above where the Hemera motor sits for two extra heat sets, this is for any future upgrades. Like a filament sensor or something.

Tags