acar power bar mounting plates for Multiboard - parametric
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting plates for acar S8 F8 power bars for Multiboard systems. The design is parametrized by Freecad spreadsheet
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 677
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Mounting plates for acar S8, F8 (and similar) power bars for the Multiboard systems.
acar power bars have pegs on the bottom that allow for the insertion of a mounting plate. There are plates for rack mounts available, but this design is for mounting the power bars to the Multiboard tiles.
The plates are designed for 9 mm large Multiboard screws.
The design is parametrized by FreeCAD spreadsheet. To adjust the design, change the values of peg_end_s (spacing between the end pegs centers <<consult the photo >>) and the peg_edge_d (distance from the center of the end peg to the edge of the power bar).