1 / 5
Double Lid Casket with magnetic latches, perfect size for Dummy 13
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Uses 6mm x 2mm magnets and 1.75mm filament for a hinge, easy multicolor printing
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 111
- Wydruki
- 0
- Wyświetlenia
- 456
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (0)Kolekcje (48)Powiązane
Designed in Fusion 360 to fit the Dummy 13 model, but would work for figures like Lucky 13, GI Joe, or others. Use 6mm x 2mm magnets for the latch, 1.75mm filament for the hinge. I printed the lid vertically with minimal supports.
These are the magnets I use: https://www.amazon.com/dp/B07XRQ44VC