1 / 2
HeroMe Gen7 ABL Wing Nozzle Camera Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount for a 5.5mm endoscope on a HeroMe ABL wing
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 128
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The nozzle camera mounts that are provided for the HeroMe didn't work for the E3D V6 on my printer. This mount connects to a right side ABL wing allowing for vertical adjustment as needed
This mount has:
- 29mm of vertical adjustment (in addition to the range of the ABL wing)
- a 10° angle towards the front of the machine to center the nozzle
- a 10° downward angle to keep the rear of the endoscope out of the way
- press fit of the endoscope while allowing adjustment (5.7mm)
NOTE:
- A 5.7mm hole made a nice press fit with my endoscope and when printed on my printer.
- Fusion 360 and STEP files are provided but there are broken sketch references.
- Depending on fan duct position it may be in the way. I have a single 5015 that has been slightly modified