1 / 2
HeroMe Gen7 ABL Wing Nozzle Camera Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount for a 5.5mm endoscope on a HeroMe ABL wing
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 128
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The nozzle camera mounts that are provided for the HeroMe didn't work for the E3D V6 on my printer. This mount connects to a right side ABL wing allowing for vertical adjustment as needed
This mount has:
- 29mm of vertical adjustment (in addition to the range of the ABL wing)
- a 10° angle towards the front of the machine to center the nozzle
- a 10° downward angle to keep the rear of the endoscope out of the way
- press fit of the endoscope while allowing adjustment (5.7mm)
NOTE:
- A 5.7mm hole made a nice press fit with my endoscope and when printed on my printer.
- Fusion 360 and STEP files are provided but there are broken sketch references.
- Depending on fan duct position it may be in the way. I have a single 5015 that has been slightly modified