Search results: herome

Counting matching models…

HeroMe Gen 7 mount for Biqu Microprobe ABL Sensor

This mount comes from the left side flat mount for ABL sensors

Downloads: 46
Likes: 4
Rating: 5

PrintablesNerd²

KP3S Titan adapter for herome V7

The one mediaman provides isn't wide enough, so I grabbed one he had correct from gen 5, remixed it to work with gen 7. The notch has been cut to still allow dual 5015, wire management file only works on one side, unless you modify…

Downloads: 46
Likes: 5
Rating: 5

Order a print of this model

PrintablesChristian Böttger

customised and customizable PCB/electronics box for TronXY X5SA Pro with TronXY direct drive upgrade kit (box for printhead distribution board) using stock gantry mount, used with HeroMe Gen 7

This a box for distribution board (PCB) of the " Direct Drive Upgrade Kit " for the TronXY X5SA Pro printer.**** I needed this because the gantry holder/gantry plate of the upgrade kit, which holds this PCB originally, cannot be used with…

Downloads: 18
Likes: 1
Rating: 0

Order a print of this model

PrintablesLantastic

SV08 Minimal toolhead cover with HeroMe ducting with nozzle view

I added only a negative modifier between the fan ducts to have a better view to the nozzle. Someone was asking to share my make. Please note: My slicer was removing too much from bottom wall, but this wall is necessary for the air flow. I…

Downloads: 18
Likes: 5
Rating: 5

Order a print of this model

PrintablesBrithim

Super-Shorty HeroMe 7.4 ABL-Wing Mount

I had issues and personally didn't like the Hero Me Gen. 7.4 Mounting options for spacing from the nozzle. So I made a much smaller ABL Wing Mount; I'm using a 45-degree angle Bl-Touch bracket with this just so there's still a tiny gap…

Downloads: 18
Likes: 1
Rating: 0

Order a print of this model

PrintablesJeh0Ke

12mm Inductive ABL Sensor for HeroMe Gen 7

I got a 12mm inductive probe but didin't find any bracket for this size. I remixed the pinda ABL bracket.

Downloads: 8
Likes: 0
Rating: 0

Order a print of this model

PrintablesScarecrow

Anet E10 & similar HeroMe Gen 5 Gantry Adapter

Quick remix HeroMe Gen 5 base for use on an Anet E10 and similar. Designed to be paired with these files from the original parts list: CR-Ender_OEM-MS_Gantry_Adapter_1A.stl 5015_Single_Radial_Fan_Dual_Ducts.stl Category: 3D Printer Parts

Downloads: 7
Likes: 2
Rating: 0

Order a print of this model

Printablesscmanjarrez

HeroMe_Gen4 Alt BL Touch Mount (x-stop fix) - fix

The model have 2 shells, so the slicer generates 2 separate parts. I have fixed the model so the slicer doesn't create 2 separate objects. probe offset: X-61 Y-18 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports:…

Downloads: 6
Likes: 0
Rating: 0

Order a print of this model

PrintablesJordan Watkins

HeroMe Gen7 ABL Wing Nozzle Camera Mount

The nozzle camera mounts that are provided for the HeroMe didn't work for the E3D V6 on my printer. This mount connects to a right side ABL wing allowing for vertical adjustment as needed This mount has: 29mm of vertical adjustment (in…

Downloads: 5
Likes: 1
Rating: 0

Order a print of this model

PrintablesYevhen Kifiak

HeroMe 7.4 SHT36 mount

v10 file - restored original shoulder length

Downloads: 1
Likes: 0
Rating: 0

Order a print of this model

Printables

SV08 Minimal toolhead cover with HeroMe ducting

UPDATED: 2026-01-05 the V3 models below are the good ones... I have greatly improved the airflow and printability of the model. It is now possible to print with the front face at a 45 degreee angle to the build plate, which greatly…

Order a print of this model

Printables

HeroMe Gen 7 mount for Tronxy "TR" ABL sensor

A mount for the TronXY "TR" ABL sensor on the HeroMe Gen7 printhead assembly. Derived from the existing ABL mount "HMG7.2 Hallon Medium ABL Left Mount", which is a few mm too short for the "TR" sensor in combination with a Volcano hotend.…

Order a print of this model

Printables

sv08 lightweight cover with HeroMe ducting

Order a print of this model

Printables

12mm Inductive ABL Sensor for HeroMe Gen 7

I got a 12mm inductive probe but didin't find any bracket for this size. I remixed the pinda ABL bracket.

Order a print of this model

Printables

HeroMe7 Microswiss FlowTech 3130 Hotend Mount

This is a hotend mount for the HeroMe7 3D Printer Head designed to fit the Microswiss FlowTech (3130) hotend meant for the Ender 3 v3. Recommend printing in PETG at >15% infill.

Order a print of this model

Printables

HeroMe 7.4 Creality Sprite (SE) feeder mount

This is for Creality Sprite feeder without hotend. Original collection didn't have such mount so I made my own. Added screenshot of how I placed it in slicer, I gor smooth results on Creality K1. Can be printed with anything including PLA…

Order a print of this model

Printables

Creality 500mw laser engraver bracket for HeroMe gen 7

Using the accelerometer port holes in the front of the herome hot end i modelled a bracket to house magnets so that i could still use my laser engraver.

Order a print of this model

Printables

HeroME Gen 5 Gantry adaptor and baseplate for TronXY X5SA Pro(2020)

HeroME Gen 5 Gantry adaptor and baseplate for TronXY X5SA Pro(2020) remixed using my own X5SA pro 2020 edition printer to model after. Confirmed that it fits, uses all original screws and the stock ABL sensor(using the…

Order a print of this model

Printables

HeroMe X-Axis limit switch fix for Ender 3 v2

Should be mounted on the back of the wing. PLA or PETG.

Order a print of this model

Printables

BMG V6 Direct Drive mount for HeroMe Gen 5 (Stock Creality Gantry)

The pre-existing Direct Drive solution for the HeroMe Gen 5 using a BMG extruder and V6 hot-end didn't take advantage of the built in V6 mount inside the BMG extruder. This meant the extruder was 40mm higher than required and used…

Order a print of this model

Printables

Kobra Go BMG Direct Drive Mod for HeroMe

This is a remix of Kobra Go BMG/DDB Direct Drive Mod for HeroMe Gen7 with E3D Volcano Mount for my 7mm Gantry Adapter Add fixed mounting point for HeroMe printhead (for 7mm gantry adapter) Reinforcement to reduce bending Mount with…

Order a print of this model

Printables

Ender 3 HeroMe Auto-bed leveling

This is just a simple remix with minor enhancements. I found this method to be the most reliable and yet cheapest solution for auto-bed leveling in the Ender-3. The M48 command on Marlin (probe repeat-ability test) gives the following…

Order a print of this model

Printables

SV08 Minimal toolhead cover with HeroMe ducting

Order a print of this model

Printables

HeroMe Gen7 HGX extruder mounting plate

Mounting plate for the HeroMe Gen7 HGX extruder. Serves as the interface between the extruder and the main body. I printed it in ABS with 10% infill.

Order a print of this model

Printables

Art déco Ender-3 nozzle fan cover for HeroMe gen 5 | 40mm fan

Parts required 2x m3x30 screws (I eyeballed the screw length, since I don't own the printer anymore)

Order a print of this model

Printables

Herome BLTouch 7mm endoscope mount

A 7mm endoscope mount to use the HeroMe BLTouch mounts, as I still use the default cr-10 V2 mount. A few variants, I found the variant (V8) which is set back 4.5mm to look round the ducts works well for me but it depends on what you have…

Order a print of this model

Printables

HeroMe Gen 7 mount for Tronxy "TR" ABL sensor

Order a print of this model

Printables

Bionaire Therometer Stand

Print in the same position as when in use.

Order a print of this model

Printables

HeroMe Gen 7 mounts for Geeetech 3D Touch V3.2 Pro Auto Leveling Sensor

Some mounts for the Geeetech 3D Touch V3.2 Pro Auto Leveling Sensor on the HeroMe Gen7 printhead assembly. Derived from the existing ABL mount for the BLtouch. The Geeetech "Pro" has a wider distance between the mounting holes, so I had…

Order a print of this model

Printables

HeroMe Gen 7 mount for Carthographer3D eddy current sensor

A mount for the Carthographer3D ABL eddy current sensor on the HeroMe Gen7 printhead assembly. Derived from the "generc skirt" + ADXL345 sensor mount of the HerMe Gen 7.4 !! This is not tested - I did not receive my Carthographer3D yet…

Order a print of this model

Printables

HeroMe Gen 7 mount for BTT Eddy Duo eddy current sensor

A mount for the BTT (BigTreeTech / Biqu) EDDY DUO ABL eddy current sensor on the HeroMe Gen7 printhead assembly. Derived from the existing ABL mount "HMG7.2 Hallon Medium ABL Left Mount", which is too short for the "BTT EDDY DUO" sensor…

Order a print of this model

Printables

Ender 5 pro herome sherpa mini print head strain relief

Quick, eyeballed remix to fit in the sherpa's motor, since original was blocked by the print. The arm is a bit thin and there's a bit space to make it thicker, but seems to work for me so far, so I'm keeping it like this for now. Rotate…

Order a print of this model

Printables

sv08 lightweight cover with HeroMe ducting

Order a print of this model

Printables

HeroMe Gen 7 modified for use on Sovol SV08 with BTT-eddy probe

I have switched the airflow redirection to be done by a modified skirt insert which attaches to the bottom of the base. The stock HeroMe base should now work, but the one here (base.stl) has better airflow. I have tried printing the base…

Order a print of this model

Printables

Beefy Ender 3 V2 HeroMe Gantry Adapter Clip

I found that the existing clip was too thin to grid the gantry plat well when installed, so I widened it in the X plane to give more material for grip, and to sit up closer to the gantry plate for a better hold Post-Printing Category: 3D…

Order a print of this model

Printables

SpeedDrive Remix Dragchain - HeroMe5 Version

Another remix of the popular speeddrive compatible with the HM5 and BMG with a pancake stepper. I added a mount for a dragchain and made a part for the X motor plate to recieve the other end (Ender 3 Pro, probably Ender 3 and v2 aswell).…

Order a print of this model

Printables

Cable Chain connector for HeroMe Gen7

Just a little cable management tail for HeroMe Gen7 that allows attachment of a cable chain. I used this cable chain:

Order a print of this model

Printables

HeroMe7 Microswiss FlowTech 3130 Hotend Mount

This is a hotend mount for the HeroMe7 3D Printer Head designed to fit the Microswiss FlowTech (3130) hotend meant for the Ender 3 v3. Recommend printing in PETG at >15% infill.

Order a print of this model

Printables

HeroMe7 Ender 3 Pro Linear Belt Adapter

Lower Belt Adapter for the Linear Rail Assembly of the HeroMe Gen7 built specifically for the Creality Ender 3 Pro with a 6mm by 6mm end stop. Print in PETG or PLA+ with a high infill rate > 45%

Order a print of this model

Printables

HeroMe Gen5 Base_1 BOWDEN SUPPORT

I designed this little part to add to a HeroMe Gen 5 (Base_1) to give strain relief and support to the bowden tube. Category: 3D Printer Parts

Order a print of this model

Printables

HeroMe Gen5 NeoPixel Stick LED Bar

I followed Sebazzz's awesome guide to add Adafruit NeoPixel Strips to the top rail of my Ender 3 and then noticed that the Hero Me Gen5 also had an option for an LED bar on the printhead. I remixed both Sebazzz's strip mount with the Hero…

Order a print of this model

Printables

Spherometer

One can fit a gauge dial (8mmShaft) in and some 3mm screws and nuts. To get the Screws pointy put it in a Screwdriver and use it as a lathe. The holes inside have a profile that should guarantee that the gauge dial measures reproducible.

Order a print of this model

Printables

HeroMe Gen5 SpeedDrive Lite

So, back when I used the Bullseye, there was a "SpeedDriveLite" version of the mount that used 0 supports and worked just as well. I was unable to find that model, else I would attribute this as a remix of that. Anyway, I tired to…

Order a print of this model

Printables

HeroMe Gen6 Ender 5 MGN-12 Top Carriage

A carriage for an Ender 5 modified to run on a linear rail. The STL attached is for a MGN-12 rail, but the FreeCAD file has a spreadsheet and instructions on how you can make it work for any linear rail. Printing PLA is suggested for…

Order a print of this model

Printables

HeroMe Gen7 Direct Drive For Vyper

This are some 3d models that help you convert the vyper to direct drive with the stock hardware and HeroMe Gen 7. Please test fit before install. The Part2 might be a pain to install. Part1 and part 2 are designed for the gantry that…

Order a print of this model

Printables

HeroMe G7 Microswiss Direct Extruder Rear Mount

Pretty self explanatory, mounts the Microswiss dual gear extruder as direct drive option

Order a print of this model

Printables

HeroMe gen7 base remix for Elegoo Neptune2s

This is a HeroMe gen7 base remix for Elegoo Neptune2s. I combined base, gantry adapter and hotend mount into one model, so you don't need to move the hotend. You just screw this model onto gantry and your done, less plastic, a little bit…

Order a print of this model

Printables

K8200 - HeroMe Gen7 Gantry Mount

K8200 aluminum profile to mount of the HeroMe Gen7. The mount should allow all the interchangeable hotends and cooling solutions for the HeroMe solution. Do as you will with it. This assists in reviving an old dinosaur bedslinger with…

Order a print of this model

Printables

herome hgh15 linerail carriage

herome hgh15 linerail carriage https://www.printables.com/model/39322-hero-me-gen7-master-suite-release-21 for herome g7 v1.0

Order a print of this model

Printables

HeroMe Hermit Crab Bltouch gantry mount

This gantry adapter is specially for use for the biqu hermit crab using a bltouch. It solves the problem I found that you had to use 2 additional pieces to mount the bl touch and it would be far out to the left of the hot end. I found…

Order a print of this model

Printables

HeroMe Gen7v3 Sovol SV04 Gantry Adapter

Needed to create a gantry adapter for my SV04 for a project to add my E3D Titan and Volcano hotend. Screw holes were a bit tight, but able to make it work. Only downfall of this model is that Sovol only included two screw holes on the…

Order a print of this model

Printables

Herome Gen 7 Cable management

This model attaches to the front of the skirt where the accelerometer can be attached and uses a cable tie.

Order a print of this model

Printables

Ender 3 Direct Drive + MicroSwiss + HeroMe5

I like the speed drive but don't want to lose the bed volume for x axis. @Blyckert version works for me but retraction will always pull the mount. So decided to remix both together. I mod them to fit my Ender 3 with stock hotend and Hero…

Order a print of this model

Printables

HeroMe Gen 7 Extruder Carriage for Ender 3

The original HeroMe Gen7 X carriage for the Ender 3 Pro did not work for me as expected. I found several issues with fit and clearance of screws when used with certain direct drive options. I designed this part to be printed as one piece…

Order a print of this model

Printables

The HeroMe Gantry Adapter Plate that Worked for Me (gen7 - Ender 3 Pro)

I don't know if I did something wrong but the first two plates I printed didn't really work, I ended up drilling holes and filing to get things to work better so I just created this. I also modified it to use the hardware I had better…

Order a print of this model

Printables

MICROSWISS DIRECT DRIVE MK8 HEROME7 GANTRY ADAPTER

MICROSWISS DIRECT DRIVE MK8 HEROME7 GANTRY ADAPTER Allows MK8 to fit on microswiss direct drive with herome 7.

Order a print of this model

Printables

HEROME 7 ENDER 3 THICK GANTRY ADAPTER - UPDATED 6/24/2023

6/24/2023: remade the holes as they were a bit too tight. Fits significantly better now. ENDER 3 THICK GANTRY ADAPTER Entirely created by myself by reverse engineering the stl from Mediaman.

Order a print of this model

Printables

Spherometer for 9.5 mm Dial Indicator

This remix of Georg's spherometer accommodates larger shafts, like the Pittsburgh dial indicator. I've made the inner hole a bit wider, and made the height taller to accommodate the longer shaft and improve balance. All fasteners are M3.…

Order a print of this model

Printables

HeroMe 5 Ender 5+ Gantry Adapter Remix

For some reason known only to the 3D Printer Gods the HeroMe 5 Gantry Adapter, either from the official package or from 11Pump, does not fit my Ender 5 Plus gantry, where the version from 11Pump fit my base Ender 5 just fine. Maybe…

Order a print of this model

Printables

BL Touch Mounts for Aquila HeroMe Gen 7 Aquila Remix

Included BL Touch mount didn't work for the dual 5015 setup I wanted to run with the direct drive mount I had at the time, and also didn't sit in the groove 100%. BL touch mounts for the original Hero Me didn't work either. Decided to…

Order a print of this model

Printables

HeroMe 3Led fan mount

I wanted to put lights on the Hero Me 7.4 I am building for my cr10. I couldn't find any that fit standard LEDs so I combined two of the stock ones and did some clean up and printability sculpting. Should work with your already finished…

Order a print of this model

Printables

HeroMe Gen 7-compatible Anycubic Mega-S X-Gantry

The original HeroMe Gen7 X-gantry design did not fit on my Anycubic Mega S. It seems that the X-gantry rods are spaced and sized differently on some versions of the Mega or Mega S. (On my Mega S, the X-axis rods are 8mm in diameter, and…

Order a print of this model

Printables

25mm Radius Spherometer

Spherometers go for $200USD or so, but the dial indicators only cost $20. I made this to help me get closer to accurate while grinding a telescope mirror. Radius is 25mm. Additional components required: 1 - Mituyoyo Dial Indicator (8mm…

Order a print of this model

Printables

HeroMe Gen 7-remix Anycubic Mega-S X-Gantry

Order a print of this model

Printables

Ender 3 HeroMe v5 direct drive adapter

This is an adapter to convert your stock nema motor and extruder to a direct drive for your heroMe printing head. Since heroMe, especialy gen5 pushes the hotend further out from the carriage, extruder motor clears the frame hence allowing…

Order a print of this model

Printables

HeroMe (Gen7) Ender 3 Gantry Adapter - Creality Falcon Laser Friendly

This change allows the mounting of Creality Falcon laser mounting bracket without removing HeroMe Gen 7 cooling system. Change does require moving ABL to RIGHT side, (CR touch fits with ‘compact’ on right side) Shifts Ender 3 hotend X…

Order a print of this model

Printables

Beacon3D mount for HeroMe base, mounts under the base close to nozzle

Easy under base mount for Beacon3D on a hero me setup, you can adjust the z height in your slicer to fit your application. Holes are sized for m3 inserts, uploaded model is 18.5mm tall, I am using a revo 6 on an anycubic kobra max so Im…

Order a print of this model

Printables

HeroMe 7.4 Creality Sprite (SE) feeder mount

Order a print of this model

Printables

Hermit Crab 2 gantry mount for Herome7

gantry mount for HeroMe7 with BTT Hermit Crab 2 (CAN)

Order a print of this model

Printables

O3D for HeroMe BLTouch Right straight out Mount

For the HeroMe Gen7 concept and fits the Probes Wings..

Order a print of this model

Printables

HeroMe 7 Gantry Adapter For Wham Bam Mutant v2 on the CR-30

The stand-offs on my linear rails Gantry Plate for my CR-30 3DPrintMill broke, causing me to get a lot of back-and-forth shifting on my prints. I was unable to find a replacement gantry plate, so I decided to reach out to Wham Bam Systems…

Order a print of this model

Printables

BigTreeTech Eddy - HeroMe7 Adapter

Just a quick adapter i sketched up for the new bigtreetech eddy probe to suit Hero Me Gen 7 Universal Base. Fits between my Anycubic Vyper Gantry Adapter and the Universal Base but should work with other gantrys etc as well. Please leave…

Order a print of this model

Printables

Papillio Extruder Mount for HeroMe

Its not 100% exact, I designed it with coarse measurements. But it fitted my Papillio pretty good.

Order a print of this model

Printables

HeroMe Gen 6 (Mod. for Creality CR-6 SE ABL)

(!!THIS IS NOT PRODUCTION READY!!) Under passive development for more than two years, I present a HeroMe Gen 5/6 base mod that enables compatibility with the stock CR-6 SE auto-bed leveling (ABL) solution. This is my first project…

Order a print of this model

Printables

HeroMe meets Switchwire

Thios is an Adapterplate, and some modded Switchwire / HeroMe Parts to get a HeroMe Hotend Assembly to work with my Anet ET4 Switchwire Conversion. To complete the Assembly, you'll need some other Parts from the original Switchwire repo.…

Order a print of this model