1 / 1
HeroMe Gen 7 mount for BTT Eddy Duo eddy current sensor — image 1

HeroMe Gen 7 mount for BTT Eddy Duo eddy current sensor

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A mount for the BTT (BigTreeTech / Biqu) EDDY DUO ABL eddy current sensor on the HeroMe Gen7 printhead…

Rating
0 / 5
Likes
7
Downloads
55
Makes
0
Views
210
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

A mount for the BTT (BigTreeTech / Biqu) EDDY DUO ABL eddy current sensor on the HeroMe Gen7 printhead assembly.

Derived from the existing ABL mount "HMG7.2 Hallon Medium ABL Left Mount", which is too short for the "BTT EDDY DUO" sensor in combination with a Volcano hotend.

The slit for the nut holding the sensor is refined to give a better fit.

v3 is a strengthened, bulkier version.

Print orientation has been optimized to minimize support.

BTT EDDY Duo https://biqu.equipment/products/bigtreetech-eddy

Print Settings

Rafts:

Doesn't Matter

Supports:

Yes

Resolution:

0.14 - 0.28

Infill:

45

Filament Material:

ABS

Notes:

I printed this in ABS (Geeetech ABS+) like all my HeroMe parts.

For all HeroMe parts, I use

  • outer layer height: 0.14mm

  • inner layer height (inner perimeters and infill). 0.28mm

  • line width 0.6mm

  • 45% infill (not really needed here though)

  • adaptive cubic infill

  • automatic tree support with lean trees, on buildplate only, "only critical" NOT checked

and two postprocessing scripts in OrcaSlicer 2.3.0

How I Designed This

Just a few modifications in OrcaSlicer ("add part" / "add negative part").

Category: 3D Printer Parts

Tags