Faucet (tap) for children's kitchen
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple faucet (tap) for the children's kitchen.
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 21
- Wydruki
- 1
- Wyświetlenia
- 222
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
At first I didn't know if I would publish this simple model at all, but then I thought that it might make one person happy... and that's enough. :-)
If your kids have been playing with the kids' kitchen with such vigour that they've broken off the faucet (tap), here's a simple model you can use to fix it. The faucet is assembled in 5 parts (one is printed twice) and I recommend gluing the parts together with instant glue.
To keep the printing simple, I divided the tap into several parts. I printed it in PLA, but maybe PETG would be more suitable. I printed it with the following setup:
- 4 perimeters
- 33% infill
- supports (on some models)
- 0.2 mm layer height
- 0.4 mm nozzle width
The tap stand has a hole in it for a 4 mm diameter and 35 mm long screw (under which it is advisable to put a washer).
I am also attaching a .step file, for easier remixing.
Hopefully someone will use the model! :-)