Manual Shutter Battery Compartment for 4x5 Polaroid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a combination of Hackaninstant's battery compartment for his 4x5 back conversion and his Arduino-based manual…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 108
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
This is a combination of Hackaninstant's battery compartment for his 4x5 back conversion and his Arduino-based manual shutter speed conversion. All credit for the original design and concept goes to him!
The guide to convert a Packfilm camera to a manual shutter can be found on his GitHub page: https://github.com/hackaninstant/Polaroid-shutter-control
I would recommend cutting the OLED display pegs shorter or off completely as the display already is friction fit. The push buttons are also friction fit, I pushed mine up to the legs and they seem to stay as long as they are not pressed with a massive amount of force. The switches are held down by melting the pegs over the metal tabs. The forward-facing display cover might also need sanding down to fit. My example also does not have labels or the wiring yet.
I found my switches and buttons on Digikey and my SSD1306 OLED on eBay.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Doesn't Matter
Supports:
Doesn't Matter
20%
Filament: eSun PLA Black
Notes:
I printed this part with 20% infill, but you may feel free to tweak it to what you think works.
Category: Camera