1 / 3
Manual Shutter Battery Compartment for 4x5 Polaroid — image 1
1 / 3

Manual Shutter Battery Compartment for 4x5 Polaroid

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a combination of Hackaninstant's battery compartment for his 4x5 back conversion and his Arduino-based manual…

Rating
0 / 5
Likes
1
Downloads
8
Makes
0
Views
109
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

This is a combination of Hackaninstant's battery compartment for his 4x5 back conversion and his Arduino-based manual shutter speed conversion. All credit for the original design and concept goes to him!

The guide to convert a Packfilm camera to a manual shutter can be found on his GitHub page: https://github.com/hackaninstant/Polaroid-shutter-control

I would recommend cutting the OLED display pegs shorter or off completely as the display already is friction fit. The push buttons are also friction fit, I pushed mine up to the legs and they seem to stay as long as they are not pressed with a massive amount of force. The switches are held down by melting the pegs over the metal tabs. The forward-facing display cover might also need sanding down to fit. My example also does not have labels or the wiring yet.

I found my switches and buttons on Digikey and my SSD1306 OLED on eBay.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

**Rafts:**

Doesn't Matter

Supports:

Doesn't Matter

**Infill:**

20%

Filament: eSun PLA Black

Notes:

I printed this part with 20% infill, but you may feel free to tweak it to what you think works.

Category: Camera

Tags