1 / 7
2x3 Lens Board for Kodak Zoom Ektanar C 102-152mm f/3.5 — zdjęcie 1
1 / 7

2x3 Lens Board for Kodak Zoom Ektanar C 102-152mm f/3.5

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a lens board for my Miniature Speed Graphic to fit a Kodak Zoom Ektanar C 102-152mm f/3.5 designed to fit a…

Ocena
0 / 5
Polubienia
0
Pobrania
10
Wydruki
0
Wyświetlenia
71
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Share Alike

This is a lens board for my Miniature Speed Graphic to fit a Kodak Zoom Ektanar C 102-152mm f/3.5 designed to fit a Kodak slide projector. The lens has been modified by cutting off around an inch of the rear of the barrel. It does not reach infinity in this configuration but works well as a close-up lens. The lens simply friction fits into the lens board. This design theoretically fits other Kodak slide projector lens of the same rack and pinion design but this is untested.

The test shots were on Instax Mini (ISO 800) and a fixed f/3.5 and were: HO Scale Trains: 1/40 Sony AVC-3400 Portapak Camera: 1/60

I think my exposure or lighting was off or maybe it is just Instax Mini being temperamental.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

**Infill:**

20%

Filament: eSun PLA Black

Category: Camera

Tagi