Tesla 500 series meters feet / Tesla 500 série náhradné strojove nožičky
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement rubber feet and parts for Tesla 500 series meters / Náhradné gumové nožičky pre Tesla 500 meracie stroje
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 70
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
| EN |
These are replacement rubber feet's and addon parts for Czechoslovak Tesla a.s. measuring meters.
These are mostly used in 500 series meters such as Tesla BM529 - Tesla BS 525 and so on.
This set should be 1 : 1 to real ones and shouldn't requite any additional hardware other than mounting screws for attaching the feet on to the meter. [ M3 x 16mm 8x ]
- Rubber feet should be made from - TPU fillament [Not super hard TPU or super soft]
- Other additive parts - PLA, ABS or PETG fillament
- !! [ The kick stand holder piece should be made from durable filament and printed on 100% infill if you want to avoid quick wear] !!
----------------------------------------------------------------------------------------------------------------
| SK |
Toto sú náhradné gumové nožičky a prídavné diely na montovanie pre Československé meracie prístroje Tesla a.s.
Tieto diely sú určené k meracím strojom 500 série, ako sú napríklad Tesla BM529 - Tesla BS 525 a podobné.
Tieto modely by mali byť 1 : 1 k skutočným kusom a netreba nič naviac na montovanie okrem šróbom na uchitenie nožišiek k meradlu. [ M3 x 16mm 8x ]
- Gumové nožičky by malý byť vytlačené - TPU výplňou [ Nie príliš tvrdou ani nie super mekou]
- Ostatné diely - PLA, ABS alebo PETG výplň
- !! [ Pre diely pre držiak na stojan odporučujem použiť veľmi pevnú výplň a vitlačenie dielu s 100% výplňou dielu predlchšiu výdrž dielu ] !!
