3662 modeli
This model has been nominated for the Printables Awards 2024 in the category 'best 3D Model in Multi-Material Design'. Thank you for your votes! Summary This is a model of a Ford Shelby Mustang GT500 'Eleanor' in a kit / gift card style.…
Check new version, - Dummy 13 v1.0 in scale - it's highly recommended if you just starting new print! It's full set of parts to print excellent Dummy13 by @soozafone in 500% scale. This remix fixes most of the problems you could get if…
Poseable hands for Dummy13. You will need the fingers from Alioth's poseable Lucky 13 hands. They are currently scaled for 500%, but should function down to about 200% (40% of this model size) scale if your printer is dialed in. If you're…
The Qube 500 is a customizable flat pack case with an all-over modular hole pattern ready for 3D printed accessories. We are teaming up with Printables to hold a special design contest around these accessories! Join the contest and win…
Dieses 3D-Modell ist ein inoffizielles Fan-Kunstwerk (Fanart) und steht in keiner offiziellen Verbindung zu Monster Energy Company oder deren verbundenen Unternehmen. Alle Rechte an der Marke Monster Energy , dem Logo, den Schriftzügen,…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
CAN LID – BASIC SERIES 🥤 A 3D printed can lid designed for maximum practicality and protection. 🔥 Key Features 🖨 Easy one-piece print – no supports, no assembly 💪 Strong, secure grip – holds better than typical alternatives 👆 One-finger…
Yet another articulated hands for dummy 13. Was made for 500%, but should work down to 200%, or up to 1000. I didn't test that scale. This hands was created for my print of this dummy 13 make . Compared to other hands, i've created…
Dummy in scale Ok, you want to print dummy in scale 500%+. First problem you will face - you can't just assemble it. Joints just cracks. Yes, hot air could be used to make joints soft. But.., why?? Okay, you can try joints+. That works,…
Please click if you appreciate my work :) A stylized 3D model of the legendary Mustang Shelby GT500 – an iconic piece of American muscle car history, reimagined with a clean, modern aesthetic. This model isn't just a car – it's a bold…
idkFord Mustang Shelby GT500
Bean reservoir extension Philips 2200-5500 (Latte Go) series. Will increase capacity to approx. 500g (1/2 kg) or 1KG beans. Pre 2023 models: BEAN 1-4 : split version of the 500gr version BEAN_1_PIECE 1 : 500gr version in 1 piece…
If you want a smaller on look at the original: https://www.printables.com/de/model/549833-euro-can-dispenser
CAN LID CLICK – BASIC SERIES 🥤 A 3D printed can lid designed for maximum practicality and protection. 🔥 Key Features 🖨 Easy one-piece print – no supports, no assembly 💪 Strong, secure grip – holds better than typical alternatives 👆…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
Simple Skoda Octavia 1 cupholder for 2 500ml cans. Doporučuji ze spod přilepit pomocí tavné pistole nebo siloconu.
If you want to print dummy 13 in 500% scale it is good start to test your printer\filament. This model has print-in-place fingers (500% scale is not easy to assemble) Modified finger joints (added fuzzy skin for better grip) Palm-finger…
Plaque for the 500kg Bomb stratagem UPDATE: 3/4/2024: Added STL files UPDATE 3/5/2024: Added V2 files that includes some fixes for misc. symmetry and centering of objects, as well as updates to the stratagem model itself to be more…
Jawa 500 OHV – Rumpál, byl první motocykl značky JAWA. Motocykl byl vyvinut německou firmou Wanderer (model K 500), poté byly odkoupeny práva p. Janečkem, a tím vznikla značka JAWA – JA neček – WA nderer. Motocykl měl čtyřdobý, vzduchem…
Headphone Stand/Holder 5000 (Attachable to Table) Enhance your workspace with our 3D-printed headphone stand, designed to securely hold your headphones while keeping your desk organized. This stand is both stylish and functional,…
I'm working on a 500% scale version of Lucky. The goal is to add details, improvments and my personal touch without change the main design. This is my remix for the hands fingers and palms printed with 10% infill and works great imo The…
Dieses 3D-Modell ist ein inoffizielles Fan-Kunstwerk (Fanart) und steht in keiner offiziellen Verbindung zu Monster Energy Company oder deren verbundenen Unternehmen. Alle Rechte an der Marke Monster Energy , dem Logo, den Schriftzügen,…
This is an adaptor to fit smaller spools in my Bambu Lab AMS. I wanted something that didn't use up a lot of filament. Video of how to install: https://youtube.com/shorts/zUIok2ksIUY?feature=share Printer: Bambu Lab X1-Carbon Speed:…
Din rail with exact dimensions (screenshot shows them half). The files attached directly and shown in the images are 4TE (Teilungseinheiten, 1TE = 17,5mm) long. I attached a .zip with 1TE, 2TE, 4TE, 8TE and 12TE. Fusion 360 project file…
Hi Internet Sim Racers, After doing a final test print of my Thrustmaster Txxx 70mm hub adaptor kit... I feel it's ready for public thrashing. Ok, so whats in the pack I hear you ask... through some form of audio bug I have in your…
Rafts: Yes Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA In the quaint town of Bellissimo, there was a charming Fiat 500 named Bella. With her vibrant red paint and retro design, she turned…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64 To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
The EMD SW 1500 is a American diesel switcher locomotive made by General Motors' Electro-Motive Division during the 60's and 70's. Some 800 were made and there are several still in serivce in the United States. This 1:32 scale version of…
This is a replacement batter cover or cap for Mitutoyo Calipers model 500-138. The identified Thingiverse model was used as a baseline for this remix. I used eSun PLA+ as filament and it seems to be robust enough for the small clips on…
Hello everyone, Suppressors for air rifles are sometimes expensive and available from many vendors. The huge problem is finding a suitable thread for your barrel. So, I've decided to design a highly effective suppressor that's easy to…
yet another stackable crate for 500 ml cans. Supports needed. A version for 250 ml Red Bull Cans is available aswell the logo was made using this model
The Qube 500 is a customizable flat pack case with an all-over modular hole pattern ready for 3D printed accessories. We are teaming up with Printables to hold a special design contest around these accessories! Join the contest and win…
Roman Coliseum with good details to 1:500 scale. The Coliseum is scaled and divided into 4 parts so that it can be printed on any 3D printer with minimum print measurements of 220x220x250 mm. PRINTING PARAMETERS Material: PLA Layer…
Added 10/11/2025 V3 rim center w/o connector parts (Schraubverbinder) (Felgenschüssel ohne Schraubverbinder) and suitable tire with M3 metric threads. Printing the threads in tpu might fail but then you can just screw them in. Threads for…
FOR THE HORDE! Can Holder 500ml
Dummy 13 500% prusaslicer compatible, pre plated, ready to print version of files by Vasichkin
German Dies ist eine Ladestation und Wandhalterung für Bosch PowerTube (+ Smart) 500, 625 und 750er E-Bike Akkus in horizontaler und vertikaler Ausführung, sowie mit hinterem und vorderem Kabelauslass (die Version mit vorderem Auslass ist…
ACHTUNG: HIER IST DIE NEUE v2.3 VERSION: LINK Dieses 3D-Modell ist ein inoffizielles Fan-Kunstwerk (Fanart) und steht in keiner offiziellen Verbindung zu Monster Energy Company oder deren verbundenen Unternehmen. Alle Rechte an der Marke…
Not to be confused with the 1500 Megawatt Aperture Science Heavy Duty Super- Colliding Super Button. This version is going to be deprecated by the end of July, but it will also come with the full tutorial for added features and simpler…
With these accessories, you can uleash your creativity and create endless layouts to attach on your PC. You can personalize it and turn your PC into a work of art. In case you have any suggestions on how to make a certain part fit better,…
Please click if you appreciate my work :) A stylized 3D model of the legendary Mustang Shelby GT500 – an iconic piece of American muscle car history, reimagined with a clean, modern aesthetic. This model isn't just a car – it's a bold…
Descrizione Porta stile e passione automobilistica nella tua casa con questa elegante wall art della Ford Mustang GT500 , realizzata in stampa 3D con PLA nero di alta qualità . Il design minimal e moderno raffigura il frontale iconico…
Update! Due to popular demand i have released the step files for easier modification. Parts: Psu module: https://s.click.aliexpress.com/e/_oDMk7jQ USB-C pd board: https://s.click.aliexpress.com/e/_oDtVUnE Banana plugs:…
Now comes in sizes up to 10! Took inspiration from the Battery Caddy, but in my opinion made it better. Here are my favorite features: Easy one handed battery removal Battery can be put in either way (positive side down or up) - use this…
The Original has the issue that you had to sand the connections to fit. Also, the connections was to thin so that the constructions start to collapse if the rack was to full. I changed the tolerances for a better fit, and modified the…
GIGGA SCRATCHA™: the Rolls-Royce of back scratchers. After trying plenty of back scratchers that were too short, too flimsy, too sharp, or just generally disappointing, I decided to make the one I actually wanted. The result is the Gigga…
Like this model? check out the smaller version: https://www.printables.com/model/1366342-two-in-one-can-holder-for-250ml-and-150ml-cans 🛠 How Does It Work? This 3D-printed can holder features a clever sliding mechanism with a built-in…
I upgraded to an android Navigation Radio system for my Fiat 500e. Since the vents have to be removed, the air would blow freely into the dash board, These vent redirect models make sure the air goes to the small vent included on the nav…
Print 0.2mm layer height. No supports are needed. 10% infill.
MItutoyo 500-184-20 Battery Cover
500g(1lb) Silica Gel Desiccant Box (Updated October 2019 with 1mm thicker sides to make it stronger and easier to print) Box to contain 500g of colour indicating silica gel for your filament dry box. The dimensions without feet are 155mm…
This is a non destructive way of fitting a HDMI output to the Amiga 500. Adding the RGBtoHDMI adapter to the original Amiga 500, gives it the ability to deliver a perfect digital HDMI output. When the small board is fitted inside the…
The legs should be printed in reinforced material, high infill value and/or more outer cells. The leg cap should ideally be printed with TPU. Print with Support. Versions: V1.A : Feets with Cooler Master connectors A litte harder to print…
🥤 Soda Can Dispenser Deluxe – Sleek, Stylish, and Functional! Upgrade your beverage organization with the Soda Can Dispenser Deluxe! Designed in an eye-catching Voronoi-style , this dispenser holds a six-pack of 330ml or 500ml cans…
Mount four 3.5 inch hdd on a 140 mm fan mount. The extra 8 holes are for stability and works on Coolermaster Q300L and Q500L cases. Ender 3 v2 0.6 nozzle PETG Category: Computer
Recently I have started to enjoy plaing games on my PS2 again, if it just weren't for this noisy fan! You can hear it several meters and it annoys me. Looking for a fix I stumbled across kaputniks design on thingiverse. It lacked some…
The side up orientation should help a little with strength and you shouldn't have any issues printing this as you would with any other model without adding further supports in slicer. Credit to…
A printed cap protection for Rotring 500 & 600 mechanical pencil. I like the original model but want to mimic the pattern from pencil. Thank to original poster for sharing the fusion file, post it back with my changes. Tested on 500 & 600…
This is a charging stand for Philips 5000 series (specifically S5582/20) electric shavers. The design uses a sleeve to clamp the cable. Please check that your charger plug is the same as that shown in the image. If it is different, then…
I modified the frame, specifically the ball joints for dummy 13 to be used when printing over 500%
I made a display stand for for Jaxal1's posable Dummy 13 hand based on Soosafone's Dummy 13 figure.
Modelled from a kit similar to this (https://goldenkoltsova.blogspot.com/2019/10/holybro-s500-v2-pixhawk-4-480mm.html) Frame is quite accurate - but not all parts tested.
Cleaned-up version of Tokyo Tower (東京タワー) (1/500) by blackrice000 . Printed at full-scale, the model will be approximately 66cm/26in tall. I recommend you make sure your retraction is dialed in, and use bridge settings. List of…
Why only smoke one cigarette, when you can smoke 25 packs at once. Yes you heard right you can smoke 500 Cigarettes at once. The only requirements are a printer that has at least a print volume of 255x230x160 and you need about 550 gramms…
These extended front parts allow the can dispenser to work with 500ml Ø66mm cans. First upload was too wide. Removed 1cm. The parts should still (barely) fit on a prusa mini, and the 3mf file has all the modified front parts with infill…
the main k10 spool holder is a little fragile and often brakes with the use of the printer and taking it off the printer is a pain in the bullocks, so i made this spool holder to solve this problem. use the 3mf file if you have a k10 but…
Wall Mount for Samsung Galaxy A7 with Cable Storage This wall mount is designed for the Samsung Galaxy A7, featuring a convenient space for organizing your charger cable. It is available in two versions to accommodate different 3D printer…
Note: This is the version for personal use ! If you want to print these files for other people, see the commercial version ! Update 2024-11-11 I've created another wheel (V3) to counter some issues I've experienced during previous…
Simple transport case for JBL Tune 500BT headphones. For hinge pin I used a piece of filament. Material: PLA Nosupport Layer high: 0,3 or lower
At 368 metres, the Berlin TV Tower is the tallest building in Germany and the fourth tallest TV tower in Europe. The TV Tower is located in the Park am Fernsehturm in Berlin's Mitte district. In 1969, the year it was completed, it was the…
Printable AA / 14500 Battery Holder: Designed to fit standard contacts measuring 10x9x0.3mm / 0.4x0.35x1/64", this holder features M3 countersunk screw fixation for added convenience. Tailored for DIY projects, it ensures secure storage…
The FreeCAD model is available in case you need to change the diameter of the screw holes (M1.4 6mm countersink). The charging cable can be removed without unscrewing the battery holder (which proved to be useful when you need to leave in…
MERCEDES-W124-500E Silhouette
Originally published here: Saturn scaled one in 500 million by tato_713 - Thingiverse Everyone's favourite planet. This model was made using MATLAB R2016a on a global map of the planet made by Bjorn Jonsson, with the contrast enhanced,…
This adds weight to your spools so they stay in place when there is little filament left. Tested with many brands of filament spools like Prusa, Raise3d, Sunlu, Eryone, BambuLab, Wanhao, Flsun, Geeetech… Some spools like Geeetech need…
Ich habe für mein Abarth 595 eine Verlängerrung Erstellt, damit Flaschen/Dosen besser halten. Die Verlängerung passt perf Passt für die Fiat 500/Abarth ab bj. 2009-2017 (bis Gen.3) Erstellt habe ich es mit Solid Edge 2024 und stelle hier…
Holder for standard 500ml (67mm diameter) European cans. Printing about 7h on A1, 300g PLA at 15% fill, support only under handle. https://www.youtube.com/shorts/VcPHv7hgoV0
Medium-sized 500g spools do not fit on the Bambu Lab X1 AMS, because the spool itself is driven (wound/unwound) by rollers which engage the rim of the spool. The 500g spools have a diameter that is too small and the rollers won't touch…
The original 500% model was created in Bambu Slicer, which does not play nicely with any other software. I manually rebuilt the files to work with PS and other slicers, and there are no material changes to the model itself. If you can…
A dryer stand for 500ml soft flask bottles from a Salomon running vest. Remix of Rainer Stropek's design.
There are 150mm and 200mm height options. Optional drip tray.
Copy of the original OPSol adapter for Mossberg shotguns. Adapter allows use of 12ga 1.75″ Birdshot, Buckshot, and Slug Shells Only fits: 12ga Mossberg® 500, 500A, 590, 590A1, and Maverick® 88 models, and the 12ga Shockwave Firearm Should…
This model is used to hold a 500 ml can on bicycle bottle cages.
I have created a model of 2020 aluminium extrusions as I had found it difficult to find a clean model online so to make it more convinient for others I had mad a simple stl file of an aluminium extrusion. If you want to build a fully…
The original design doesn't fit MiKA3D's 500g spools correctly, so I modified the tabs so they're easier placed on these spools.
Another little helper for your power wall. Connecting a smarthsunt to the Lynx on the female side via 30 mm copper bar leaves some connections bare. Hence, a cover would be appreciated. Here it is, based on the original step file of…
Technical information for all model files : Nozzle size: 0.4 mm, no Input shaper Layer height: 0.2 mm (Quality) Materials used: PLA/PETG Printer used for prototyping: Prusa MK4 Type of bed used for prototyping: Textured Notes : All…
an easy-to-print ram mount holders for Mikrotik RB5009 for 10inch or 19inch rackmounts.
Print this with with the base flat to the print bed. You need supports just for the 2 ledges that insert into the track. I just painted them on and they come right off after the print is done. You attach the mount to the base of the…
Can dispenser designed for 500ml cans (diameter 66mm, length 169mm). Other dispensers I tried didn't hold cans well enough while traveling downwards. Dispenser has been designed to fit 350mm depth shelves (tested on Bosch fridge) Print…
A 3D printed can lid designed for maximum practicality and protection. 🔥 Key Features 🖨 Easy one-piece print – no supports, no assembly 💪 Strong, secure grip – holds better than typical alternatives 👆 Two-finger operation – open & close…
Compatibility Ph3 horizontal or Ph4 vertical oem fiat 500/595 vents. Print Print one with vertical symetry to get the 2nd side. Use ASA or ABS for hot days… For phase 4 only, you will need to apply a scale multiplayer because the oem…
Simple Screw top Oral B Pro 500 Toothbrush case I designed for my girlfriend.
Größe angepasst auf Deckelgröße 2023 (500g) Rundung 5mm eingefügt Radius eingefügt, sodass ein Drucken ohne Support möglich ist 250g Variante hinzugefügt, danke @ jot-entdecken.de
So you washed your boxing wraps, but do you dread winding them up by hand into little spools? The Master Wrap Machine 5000 does this for you in no time! Features: Simple, robust, functional design. Build to last. Handles a wide variety of…
This is a model for an end cap of a Thule Omnistor 5002 awning. Dies ist ein Modell für eine Endkappe einer Thule Omnistor 5002 Markise. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Yes Supports: Yes Resolution: 0.2…
Designed that long time ago and tbh too lazy to go a photograph the printed product but for me it works with the fat stem beach umbrellas. Standard 0.4 nozzle mine is of ASA After several times being used still holds.
![Blackhole-5000 Silencer [1/2" - UNF-20]](https://media.printables.com/media/prints/565286/images/4534474_8b7c7bdd-bb70-437e-a7e4-073ea9afb9dc/bh7.jpg)
![Bosch Indego S500 rear wheels V1 [personal use]](https://media.printables.com/media/prints/262266/images/2341224_aa5cc481-3db9-4bf3-88bd-520463c2462d/img_7759.jpg)
