1 / 5
Battery Travel Case (AAA, AA, 14500, 18650, 21700) — zdjęcie 1
1 / 5

Battery Travel Case (AAA, AA, 14500, 18650, 21700)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

No support, easy to print, minimalist battery travel case. Comes in many sizes.

Ocena
5 / 5
Polubienia
300
Pobrania
966
Wydruki
19
Wyświetlenia
3006
Oceny
16

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial

Now comes in sizes up to 10!

Took inspiration from the Battery Caddy, but in my opinion made it better. Here are my favorite features:

  • Easy one handed battery removal

  • Battery can be put in either way (positive side down or up) - use this to denote if a battery is full or depleted

    • Whichever terminal is facing down is fully protected (this isn't the case with other models)

  • The single tubes have a flat spot on the back to help prevent rolling

  • Easy to print: optimized for 3d printing, like no supports needed

As you can see from my pictures, I've tested the sizes with many brands to ensure proper fitment. They work for button and flat top unprotected cells, haven't tested any protected cells (don't own any).

Print recommendations:

  • PETG and PLA have been tested and both work great!

    • PLA will deform in higher temps like a hot car or if left out on a sunny day.

  • I was able to get the seam to practically disappear by using Scarf Seam Type: Contour

  • .2mm layer height

Tagi