Choc Louder Keycaps (Choc and Mx Spacing)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Square shaped Choc keycaps w/ multi color support for Kailh Choc spacing (18mm x 17mm) or Mx Spacing (19.05 x 19.05)
- Ocena
- 5 / 5
- Polubienia
- 147
- Pobrania
- 1084
- Wydruki
- 5
- Wyświetlenia
- 3914
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
Models are contained in two folders based on spacing Choc (18mm x 17mm) or Mx (19.05mm x 19.05mm)
Dimensions
Choc
- 1u: 17.5 mm x 16.5 mm
- 1.25u: 21.9 mm x 16.5 mm
- 1.5u: 26.5 mm x 16.5 mm
- 1.75u: 30.6 mm x 16.5 mm
- 2u: 35 mm x 16.5 mm
- 2.25u: 39.4 x 16.5 mm
MX
- 1u: 18 mm x 18mm
- 1.25u: 22.5 mm x 18 mm
- 1.5u: 27 mm x 18 mm
- 1.75u: 31.5 mm x 18 mm
- 2u: 36 mm x 18 mm
- 2.25u: 40.5mm x 18 mm
Multi-Material Homing Keys
1u homing keys for both MX and Choc profiles support multi material printing. In order to change how many homing nubs a key has delete the objects you do not want in your slicer software, by default all 5 will be present. You can also change the filament of the homing nubs or keep them the same as the cap.
Print Settings
On my Bambu Labs X1 I had great results printing the keycaps along an edge.
Quality Settings
0.12mm Layer Height
Strength Settings
Wall Loops 3
Infill Density 30%
Support Settings Changed from Defaults
type: tree
On build plate only
Disable Remove small overhangs
Top interface spacing 0
Updates:
- Added multi material homing nubs