Low Profile Belt Tensioning Nut for use with FessyFOO's Belt Tensioner Puller Design
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a low profile elongated and enclosed puller nut for belt tensioners based on fessyFOO's belt tensioning puller.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 153
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I've been using belt tensioners for both X & Y axis's puller design by fessyFOO rather happily for some time now.
I didn't particularly care for fessyFOO's nut design as it's so small and difficult for me to grip, so I was using yac's “A larger nut for ‘fessyFOO’s Yet Another Belt Tensioner'” for a bit, but ran into clearance problems on the Y axis on one of my machines, and went back to using fessyFOO's nut.
I finally got around to designing a nut that is low profile while still easy to grip, and, IMO, a bit more attractive than available alternatives.
This part prints easily as oriented in the STL without any need of supports.
I'm currently using rhyonly's “[No support needed] ENDER 3 PRO Y Axis Belt Tensioner” design on my two Ender 3 Pro's: https://www.thingiverse.com/thing:4590229
I'm using my remix of rhyonly's model on my CTC A10s and Tronxy XY 2 Pro: https://www.printables.com/model/593361-ctc-a10s-y-axis-belt-tensioner-no-supports
All of my Creality and Creality like FDM printers are currently using my remix of JOGIAREA's "Riemenspanner X tensioner" for the X axis's: https://www.printables.com/model/529969-x-axis-belt-tensioner-for-tronxy-xy-2-pro
I've included the modified puller screw models I'm using for both axis's and a 5mm to 8mm spacer for the Xaxis. All of my Creality styled machines use two 4mm shoulder bearings for their Y axis idler rollers, so a 4mm screw and nylock nut is all that's needed, however, the X axis's on all my machines use 8mm shoulder bearings. The screw holes and nut cut-out on the X puller are intended for a M5 screw and nylock nut, so I included a 5mm to 8mm spacer that fits through the two 8mm bearings before installing it in the tensioner housing and running the 5mm screw through it.
I know there are alternatives to fessyFOO's design that should effectively be stronger, having the puller able to be printed horizontally rather than vertically. I'm using fessyFOO's design on 5 of my 11 machines, some of them for several years now, and none have yet failed. I'll still recommend that the pullers included here be printed with 100% infill