Low Profile Belt Tensioning Nut for use with FessyFOO's Belt Tensioner Puller Design
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a low profile elongated and enclosed puller nut for belt tensioners based on fessyFOO's belt tensioning puller.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 31
- Makes
- 0
- Views
- 153
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I've been using belt tensioners for both X & Y axis's puller design by fessyFOO rather happily for some time now.
I didn't particularly care for fessyFOO's nut design as it's so small and difficult for me to grip, so I was using yac's “A larger nut for ‘fessyFOO’s Yet Another Belt Tensioner'” for a bit, but ran into clearance problems on the Y axis on one of my machines, and went back to using fessyFOO's nut.
I finally got around to designing a nut that is low profile while still easy to grip, and, IMO, a bit more attractive than available alternatives.
This part prints easily as oriented in the STL without any need of supports.
I'm currently using rhyonly's “[No support needed] ENDER 3 PRO Y Axis Belt Tensioner” design on my two Ender 3 Pro's: https://www.thingiverse.com/thing:4590229
I'm using my remix of rhyonly's model on my CTC A10s and Tronxy XY 2 Pro: https://www.printables.com/model/593361-ctc-a10s-y-axis-belt-tensioner-no-supports
All of my Creality and Creality like FDM printers are currently using my remix of JOGIAREA's "Riemenspanner X tensioner" for the X axis's: https://www.printables.com/model/529969-x-axis-belt-tensioner-for-tronxy-xy-2-pro
I've included the modified puller screw models I'm using for both axis's and a 5mm to 8mm spacer for the Xaxis. All of my Creality styled machines use two 4mm shoulder bearings for their Y axis idler rollers, so a 4mm screw and nylock nut is all that's needed, however, the X axis's on all my machines use 8mm shoulder bearings. The screw holes and nut cut-out on the X puller are intended for a M5 screw and nylock nut, so I included a 5mm to 8mm spacer that fits through the two 8mm bearings before installing it in the tensioner housing and running the 5mm screw through it.
I know there are alternatives to fessyFOO's design that should effectively be stronger, having the puller able to be printed horizontally rather than vertically. I'm using fessyFOO's design on 5 of my 11 machines, some of them for several years now, and none have yet failed. I'll still recommend that the pullers included here be printed with 100% infill