Counting matching models…
This part serves no purpose other than to make my Tronxy XY-2 Pro match the aesthetics of my Creality and like machines. I like to install similar upgrades on all my “like” machines for uniformity sake. Since my Tronxy XY-2 Pro is barely…
A mount for the TronXY "TR" ABL sensor on the HeroMe Gen7 printhead assembly. Derived from the existing ABL mount "HMG7.2 Hallon Medium ABL Left Mount", which is a few mm too short for the "TR" sensor in combination with a Volcano hotend.…
I'm on a mission to upgrade my Tronxy X5SA into a truly great machine. This adapter lets you combine all the hardware from a Voron Afterburner kit with the existing Tronxy components to make the installation seamless. It let's us reuse…
For an upcoming projecting I needed to upgrade our old TronXY XY-100 (also known as an iMakr STARTT) to be able to run Klipper so it needed to have it's original brain pulled out and replaced. I made this adapter board to sit in place of…
As part of our plan to upgrade our TronXY XY-100 (also sold as iMakr STARTT) printer with a CoPrint system it was necessary to mount the Klipper Chroma Module (KCM) onto the printer. This bracket is designed to fit where the LCD screen…
I'd noticed that the XY100 (Also known as an iMakr STARTT ) printer we had was sometimes resting on the bottoms of the Z axis motors which isn't ideal. I designed this foot / base so that the acrylic main panels would be supported without…
To proof, if a expensive rail mod is worth the upgrade, this is a minimal-invasive mod. i wanted the cheaper MGN12H carriage but it not fit between the v-slot holes. So, MGN12C is the way. Use M4x6.5 thread inserts and M4x10 screws. if a…
Tronxy X5SA Pro Voron Toolhead mount to fit Afterbumer , stealthburner and other voron toolheads. you have to cutdown the orginal plate for the xy belts to clear the motor and the front plate as shwon in photos. the clockwork 1 mount has…
WORK IN PROGRESS Custom build CoreXY based on Monolith gantry and Ratrig Z system Monolith AWD Trident gantry modified to fit Tronxy 2020/2040 frame, 6 mm belts Compatible with other parts from original designer, you can download the rest…
As the Tronxy XY-2 Pro uses 3mm bed screws, and they're so close to the corners of the bed, I couldn't fit the bed leveling knobs I use on most of my Cartesian style bedslingers. Wanting a similar look and feel to my other machines, I…
Print Settings Printer: Tronxy/Zonestar p802m Rafts: No Supports: No Resolution: 0.2 Infill: 20% Gyroid Filament brand: Smartfil Filament color: Natural Filament material: PLA Notes: 30 mm/s en vitesse d'impression et 20mm/s pour les parois
Print Settings Printer: Tronxy/Zonestar p802m Rafts: No Supports: Yes Resolution: 0.1 Infill: 100% Filament brand: Smartfil Filament color: Natural Filament material: PLA Notes: 30 mm/s d'impression et 20 mm/s pour les parois
This is a mounting plate that allows an E3D Hemera hotend assembly to be attached a stock TronXY X5S carriage without any modifications. It is a correction of a model on Thingiverse by thetigger which had incorrect dimensions of both the…
I hope I helped someone because I couldn't find any 5015 fan duct for Tronxy XY 2 pro. layer height 0.2; infill better more than 25%; in your printer bad at overhang(like mine) i recomend to cut model at 5.10mm or 25 layer and use…
I wanted to replace the original Tronxy X5SA bed, but because of the XT60 connector, the original CableChain couldn't be removed without either cutting the wire or unsoldering the connector. I wanted to keep the ability to hot-swap bed in…
This was made to fix an issue I had with mounting my 400x400 bed as the frame provided didn't fit. I left the base without holes so you can adjust as required to locate the bed where needed to work with your frame. 2-4 M3x6 screws fit in…
This is the print cooling duct that came default with your Tronxy Crux1's gcode turned into stl. Smaller layer heights is recommended and also a filament that withstands higher temperatures + wear and tear since you will be screwing into…
This part serves no purpose other than to make my Tronxy XY-2 Pro match the aesthetics of my Creality and like machines. I like to install similar upgrades on all my “like” machines for uniformity sake. Since my Tronxy XY-2 Pro is barely…
Recently, my Tronxy XY-2 Pro has been acting as my test bed for extruder upgrades and such. I first adapted the machine to work with a direct drive extruder kit from Comgrow, which essentially installs a Sovol SV06 planetary gear direct…
Needed a Z Axis Stabilizer for my Tronxy X1 and a Spool Holder, so I decided to combine these two designs. It works just as I hoped. A big thank you to the original designers of these two accessories. It is sized to fit the print bed of…
Thanks to CroXY3D and Sivis for the Salfin extruder and Leo DIY for the Volcano holder. GitHub page by CroXY3D: https://github.com/CroXY3D/Sailfin-Extruder The remaining Salfin parts from:…
This isn't really a complete remix, but more of an add-on. I figured this would be the best way for people to see it. I picked up a Tronxy X5SA Pro 400 for a project, and price was great. I did however want to give it a bit more…
The Tronxy X5SA bed just keeps loosing the aligment betwen the two Z screws... And sometimes likes to crush the nozzle on the bed. This simple Z stoppers works like a charm to reset the aligment, just rises de bed manually with the motors…
This is a mount for the extruder and the filament sensor for the TronXY X5SA. It replaces the stock mounts. This mount was designed to move both the extruder and the filament sensor in the middle of the back side of the printer. You can…
This is a remix of 794832-fanduct-tronxy-x5sa-pro. I modified it to fit with a volcano heat block. And works good!
Approximate model of Marlin 2.0 v5 PCB ripped from Tronxy X1, dimensional accuracy -+ 1 mm due to usage of bad calipers.
Bonjour, voici ma version de tour de rangement avec des bobines vides Tronxy Dailyfil et BQ. Je me suis inspiré de choses ressemblant sur thingiverse, mais j'ai créer les pièces selon mes besoins. Cette tout utilise une tige fileté M8 en…
Top Mount Spool for Tronxy Crux 1 use old one screws and aluminium mount, recomend use 100% infill for more strong holding Print Settings Printer: Tronxy Crux 1 Rafts: No **Supports:** No Infill: 100 Category: 3D Printer Parts
look at my other uploads for fan mounts and ebb42 mounts if needed
mounts to the cable chain mount above the printhead, i designed it for my h2v2s conversion but should work with most hotends and printers
The brackets that came with mine didn't seem to fit the same on both sides so I set out to recreate them. [2017-12-23] Added alternate version with inset holes for the 3 larger nuts and bolts. This should allow you to tighten them with…
Basic mount for e3d v6. My original idea was to create a basic one and use this part cooling fan mount that I've used and liked: http://www.thingiverse.com/thing:1746358 NOTE: Thanks to Ray (un: ray4510) for the 'blank sled' UPDATE…
Required Parts: Screws - 6x M5x10 - 21x M3x8 - 16x M3x25 (for Fans) - 12x M3x12 (for accents on feets) - 4x M5x16 MINI Variant - 6x M3x12 - 1x M3x40 Nuts - 6x M5 VSlot Nuts - 21x M3 VSlot Nuts - 16x m3 (for Fans) - 4x M5 MINI Variant - 4x…
HeroME Gen 5 Gantry adaptor and baseplate for TronXY X5SA Pro(2020) remixed using my own X5SA pro 2020 edition printer to model after. Confirmed that it fits, uses all original screws and the stock ABL sensor(using the…
The Co-Print Chroma multi-color printer conversion kit I had kickstarted finally arrived, and I needed a way to mount it on to my heavily modified TronXY X5SA-400 without interfering with the X-End Stop switch on the carriage (I have no…
Es ist nur ein erster Entwurf für meinen Lüfter am H2 Extruder für den Tronxy X5S. Aurora V1 Duct. Es wurde so designt dass der Lüfter beim Homing nicht gegen die vordere Stange fährt und noch Platz ist. Für die Löcher brauchen sie…
I was looking for solution to automate the nozzle cleaning on my TRONXY printers converted to Klipper. Searched a bit and could not find any solution for using a silicone brush. The Bambu A1 silicone brushes are very cheap on AliExpress…
Utilizes M4 screws and M4 nuts the for the socket and M3 or M4 screws with T-nuts to attach it to the 2020 extrusion, but I've included .step file to modify it for your needs.
NOTE: This model is a piece of actual crap. I'd recommend you drop it into fusion, trace it out and make your own (I don't have any design files for it). If you are like me and are fine with absolute ghetto trash on your printer, please…
I wanted to mount the display at the front to save space. I therefore recreated the screen frame. This means that the screen can be installed at the front without any adjustments. I rotated the rear cover by 180°. I used M3x14 screws with…
Using this cause Discord doesn't let me upload a big file. untested. do not use this. ignore the name
This mod// fix adds a spacer inside the top of hot end that allows a cut length of tubing to be lightly compressed against the nozzle. also taking the extra work of maintaining that seal away from the teeth in the bowden coupler. See the…
Verstellbare GL-8H Tronxy X5S Endstophalter Adjustable GL-8H Tronxy X5S Endstop Mount
PLEASE BE CAREFUL WHEN MOUNTING THIS UNDERNEATH YOUR EXTRUSION. Make sure the camera can clear it when the bed is pressed up against the nozzle. If you don't something WILL break. Webcam mount that uses the metal rails the bed screws…
A Baseplate for The Tronxy X5SA. Compatible with my Voron Grill conversion. MAde to use with these brackets: https://www.printables.com/model/934527-2020-extrusion-corner-brase/files (the large ones). to secure use you will need: 4x m3x10…
I wanted to raise a TronXY X3A and place the control box underneath, but I didn't feel the legs available here correctly matched the look and feel of the 3D printer. So, based loosely on the concept provided by pwalter824 (thanks), I…
This is a mount for the Tronxy X1 (may also work for the X3) to fix the E3D lite6 hotend complete with fixings for the Super Cooler 30mm fan ducts. Please note: the front clamp is asymetrical, please make sure you install it the correct…
I was inspired to make this after I saw the Tronxy x3 control PCB cradle by Richard Baldock . This is a Melzi Board support frame that fits inside the TronXY X1 control box. Print Settings Printer: TronXY X1 Rafts: No **Supports:** No…
I needed replacements for my mounts that were slowly deforming in my heated enclosure(40C) due to them being made from pla. Also, as is standard for Tronxy, the mounts came with warping by the threaded bushings that required me to shim. I…
Having the bed shift on the wobbly springs mid print is very annoying so here is my answer. A cup part on one end and a post on the inside on the other. This tightly constrains the spring while still allowing plenty of adjustment range.…
Print this and it's mirror and bolt together using Tronxy's original hardware plus 2 m3 screws and nuts. Get the other parts from https://www.thingiverse.com/thing:2149867 Print instructions Category: 3D Printer Parts Print Settings…
The parts that came with the printer to hold the smooth rod were pretty mickey mouse and couldn't be tightened neatly without shimming due to the rods sticking above the frame quite a ways. I left extra room above the rod and added…
This is a redo of my original x-tensioner so I could replace the idler bearing with a geared bearing to reduce belt vibration. This uses the same 5mm hardware that came with my printer. This is made to use a GT2 20 teeth idler pulley with…
This is a simple thing that I changed on my Tronxy P802E that made a BIG improvement on getting a consistent bed level from print to print. I replaced the horrible acrylic bed undercarriage with a solid homemade aluminum one. I went with…
This is a new and improved cooling duct design for my E3D V6 mount design https://www.thingiverse.com/thing:2536764 that I made for my Tronxy P802E. This duct is much smaller than my crazy wide duct I posted initially. It is half the size…
Frame braces I made for my Tronxy P802E that got rid of most of the wiggles. I made some revisions to a few parts after making the ones that are on my printer so some will look a bit different then in the photos. The braces on the front…
I made these to reposition my bed motor on my tronxy p802e. My old motor was wearing out and I wanted to make room for a better more powerful motor. Also, I wanted a better belt clamp that would make sure the belts were fairly level. The…
When the extruder is mounted on the left side, the lever interferes with the x motor at the top of the print range. This plate shifts it away just enough. Print instructions Category: 3D Printer Parts Print Settings Rafts: No Supports: No…
A simple, better looking Y tensioner that will allow the bed to travel forward about 10mm - 15mm farther. This is helpful when switching to other extruders that push the nozzle “forward” of the original position. Installation requires two…
Printed on the X5S before switching to a direct drive setup. You'll want to re-orient the models for better printability. The guide should be printed as an "L" shape, looking down onto the bed. The spool-holder-bracket should be printed…
VZbot lower left grill with power socket hole for socket that comes with Tronxy X5SA
The 10x11 Cable chain delivered via german Amazon had a smaller space betweeen the holes and so i designed it new. this chain: Zeberoxyz 10x11mm Schleppkettenlänge 1Meter offener schwarzer Kunststoff-Kabelträger R18 mit 1Kit Endverbindern…
I thought I was modifying the up-to-date Baseplatte.stl from the supplied stp files, but after I printed my mod, it didn't align up. The original Voron Revo printhead (printhead_rear_revovoron.stl) from the Afterburner github has…
This model is a deep modification of a Tronxy x5sa-400. I printed all the top green parts with Prusament PC. i bought mainly on Ratrig's website: -M5 Countersink Screws 10mm -M5 Countersink Screws 14mm -M5 Countersink Screws 30mm -M5 Low…
I created this to extended how far out the bed chain was from the support bar. This was to prevent the toolhead from hitting the bed chain when running a mesh calibration. The bottom support for the bed chain needs to be moved to the…
I was very unhappy with printing with a Bowden setup. I found some Direct Extruder Things here, but i wasn't happy with that because of weight. So i decided to build a Direct Extruder for my X5S. I want to use this Carriage (…
Hey there, i have often the problem with new spools, that the filament springs down on the side. So i created this thing, which hold the Spool itself, guids the filament and with some cleaningmaterial glued under the guide it cleans the…
Um die Lautstärke meines X5S zu reduzieren habe ich Stoßabsorber für die Nema Motoren verbaut. https://www.amazon.de/gp/product/B01MDMR9X5/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1 Ich muss sagen, das war ein voller Erfolg, er läuft…
I wanted to mount my Extruder on the Side of my printer, so i created this mount. PS: I'll add some more pictures. Category: 3D Printer Parts
The Bed Endstop Switch on my Tronxy X5S was horrible. I get never the same height. So i added a optical Endstop from a Bed Leveling Sensor laying around here. It works very well. Category: 3D Printer Parts
Bürstenhalter für diese Bürsten von Amazon passend für einen Tronxy Drucker. Mein Startscript lässt beim Start etwas Filament extrudieren und fährt dann über die Bürste zum Startpunkt.
This is a spacer for the filament run out sensor of the TronXY X5SA. It straighten the filament between the sensor and the extruder. You will need to replace the screws with some M4 x 16 mm. Support material is not required. An infill of…
Print the cooling shroud. PLA should work fine, but I used PETG. Using an SLA printer would be amazing I'm sure. Mount (two) 50mm 5015 Blower Fans 24V onto the cooling shroud and splice the fans together on a single connector. Unplug the…
Still a WIP, but i will print it ASAP to see if everything is alright; Print main parts with PETG ,(or ABS if enclosed) Print the fanduct with ABS if possible You will need to print an adapter to use the bambu hotend (fixed on the remix…
Tronxy Crux 1 base with pi zero mount, buck converter to convert the 24v to the 5v to the pi and a mount to the original fan. You wil need some m3 heat inserts and some m3 screws; Print with PETG but if you use your printer enclosed, use…
This a box for distribution board (PCB) of the " Direct Drive Upgrade Kit " for the TronXY X5SA Pro printer.**** I needed this because the gantry holder/gantry plate of the upgrade kit, which holds this PCB originally, cannot be used with…
The original design is for a X5SA, the X5SA pro has a different mounting plate for the filament sensor, so in order to replace it there is an additional flat extension of the new part needed (as the original X5SA plate cannot be used in…
A mount for the TronXY "TR" ABL sensor on the HeroMe Gen7 printhead assembly. Derived from the existing ABL mount "HMG7.2 Hallon Medium ABL Left Mount", which is a few mm too short for the "TR" sensor in combination with a Volcano hotend.…
Tronxy X5SA PRO 330 Top Bearing mount for Z Axis replaces the orginal metal one that isnt long enough. uses 608ZZ bearing. im using this with Wobble X by Marage C and its working fantastic.
This 3D STL model is a custom spool holder for the Tronxy X5S 3D printer, designed for support-free printing . The geometry is optimized to print cleanly without supports. The holder is compatible with the original spool screw supplied…
This is a reduction adapter designed for the Tronxy X5S Stock Extruder Cooler Mount with BLTouch mount ( Tronxy X5S Stock extruder cooler mount with BLTouch mount od autora ukwebb | Stáhnou STL model zdarma | Printables.com ). It allows…
I'm on a mission to upgrade my Tronxy X5SA into a truly great machine. This adapter lets you combine all the hardware from a Voron Afterburner kit with the existing Tronxy components to make the installation seamless. It let's us reuse…
A basic brace for the TronXY X5SA series (or any printer using 20mm extruded aluminium for the frame). Mount in a corner and use tslot nuts and screws to secure. Ideally you should choose to print "with support touching buiold plate…
You need 2 M3 40mm and 2 M3 5mm screws. Print it in ABS or ASA at 100% infill. Make sure to have your supports tuned or youll find yourself drilling the 35mm holes. The supports released perfectly fine for me.
Remixed idlers taken from Fysfys's original design. This version allows the idler mounts to sit on both sides of the extrusion. I remixed as I found the original was starting to bend inwards making the belts rub, this avoids the issue by…
box for BTT EBB42 CAN v1.2 board for Tronxy XY X5SA Pro printer I upgraded my X5SA Pro to Klipper and got rid of the cable nonsense from Tronxy by using CAN, in the case the BigTreeTech/BTT/Biqu EBB42 CAN v1.2 board. This is mounted to…
i had some different requirement for my X5 .. so i used and modified a version Category: 3D Printer Parts
I couldn't find a suitable mount so I made one. Using the pudgy duct for cooling (ounting plates half-dovetail together for a secure hold. BDsensor mount is properly height adjustable and mounts to the front of the pudgy duct.
I needed to move the bed forward quite a bit when changing to a vzbot gantry, so I designed these rod clamps to hold the upper rod ends. Clamping style allows for easy mounting without removing the rods from the frame completely. mounts…
Just my modified capacitive sensor bracket for my TronXY X5SA PRO. I drilled new holes above the stock bracket location to give some adjustability to the sensor and found that the bracket blocked the stock fan shroud mounting bolt. I used…
For an upcoming projecting I needed to upgrade our old TronXY XY-100 (also known as an iMakr STARTT) to be able to run Klipper so it needed to have it's original brain pulled out and replaced. I made this adapter board to sit in place of…
Adaptor to fit the Wiiboox LuckyBot 3D Printer Food Extruder to Tronxy P802, Anet A8 and Similar 3D printers. Will require 2 off M3 x 20mm cap head screws to fit belt ends around.
In 2018 bought a cheap Chinese large Core-XY printer with a lot of shortcomings. With a number of upgrades, this is a much much better printer. Ended up replacing the rollers for X-motion of the print head with solid printed-plastic…
I rather like the approach of placing all the electronics on a pegboard mounted to the back of the printer. Gives a lot of flexibility, with better appearance, while at least seeming more organized. (Added a Raspberry Pi running OctoPi…
This is a scaled down version of the "Anet A8 T corner" by " Electrico". Original Thing: https://www.thingiverse.com/thing:1672959 I made this to fit my Tronxy X8 which utilizes 7mm thick acrylic. If you build this project and want to…
As part of our plan to upgrade our TronXY XY-100 (also sold as iMakr STARTT) printer with a CoPrint system it was necessary to move the Z endstop up by quite a large distance in order to accommodate the considerably larger Chromahead that…
As part of our plan to upgrade our TronXY XY-100 (also sold as iMakr STARTT) printer with a CoPrint system it was necessary to mount the Klipper Chroma Module (KCM) onto the printer. This bracket is designed to fit where the LCD screen…
