TronXY X5S Direct Drive Spool Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Printed on the X5S before switching to a direct drive setup.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 50
- Makes
- 0
- Views
- 485
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Printed on the X5S before switching to a direct drive setup.
You'll want to re-orient the models for better printability. The guide should be printed as an "L" shape, looking down onto the bed. The spool-holder-bracket should be printed with the longest flat side down on the bed and the shorter side, which is mounted to the t-slot, will rise straight up off the bed.
The spool holder needs no new hardware, simply remove the existing bowdin spool holder and re-use the bolts and t-nuts.
Slice a 2mm piece of the bowdin PTFE tube off and put it in the filament guide.
I'm using this with:
Titan Extrude
Titan Extruder Pancake Motor
Volcano Heater Block
For the fan shroud, I did not use a magnet, I just drilled a 3mm hole and used a 3mm bolt to hold it on.
Print instructions
Category: 3D Printer Parts Print Settings
Rafts: No
Supports: No
Resolution: .8mm nozzle, .4mm layer heights (but you can use any)
Infill: 25-65%, I used 25%
If you find this model useful, consider supporting my work: https://ko-fi.com/natester