Printable Cable Chain - Tronxy Fixed end
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adjusted fixed-end 2-holes of the excellent Printable Cable Chain by Scops Owl Designs for Tronxy.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 78
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to replace the original Tronxy X5SA bed, but because of the XT60 connector, the original CableChain couldn't be removed without either cutting the wire or unsoldering the connector.
I wanted to keep the ability to hot-swap bed in case one fail, so I decided to print a new cable chain.
The excellent Printable Cable Chain by Scops Owl Designs was a great model to start from. All that was needed was to adjust the hole positions to match the original bracket.
Note that I only realized that I could remove the chain without removing the last piece AFTER I adjusted the models and printed the new parts.
Oh well, here it is anyway for any Tronxy user that may break their's!