Printable Cable Chain - Tronxy Fixed end
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adjusted fixed-end 2-holes of the excellent Printable Cable Chain by Scops Owl Designs for Tronxy.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 78
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to replace the original Tronxy X5SA bed, but because of the XT60 connector, the original CableChain couldn't be removed without either cutting the wire or unsoldering the connector.
I wanted to keep the ability to hot-swap bed in case one fail, so I decided to print a new cable chain.
The excellent Printable Cable Chain by Scops Owl Designs was a great model to start from. All that was needed was to adjust the hole positions to match the original bracket.
Note that I only realized that I could remove the chain without removing the last piece AFTER I adjusted the models and printed the new parts.
Oh well, here it is anyway for any Tronxy user that may break their's!