1 / 47
Original Hot End Fix Creality, Creality NEO, Tevo Tornado, Tronxy, JG Aurora, Eryone ThInker, MP mini, Sovol S4 — image 1
1 / 47

Original Hot End Fix Creality, Creality NEO, Tevo Tornado, Tronxy, JG Aurora, Eryone ThInker, MP mini, Sovol S4

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This mod// fix adds a spacer inside the top of hot end that allows a cut length of tubing to be lightly compressed…

Rating
0 / 5
Likes
1
Downloads
14
Makes
0
Views
87
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Share Alike

This mod// fix adds a spacer inside the top of hot end that allows a cut length of tubing to be lightly compressed against the nozzle. also taking the extra work of maintaining that seal away from the teeth in the bowden coupler.

See the post processing section for step by step instructions on putting the parts together.

There are verions currently for the following model hot ends, Ender-3, Ender-3 pro Ender-5 all use the standard ender .stl), CR10, cr10 V@ and V3 (CR10S Pro/Max at bottom of page). Tevo Tornado, Tronxy X5SA

I have added an .pdf that has the tools to calibrate your printer to adjust for your now improved flow rate.

If you need new tubing and couplers use this discounted link below

https://www.th3dstudio.com/product/essential-creality-ptfe-upgrade-pack/

added larger diameter hole for the pc4 m10 size spacer for easier filament withdrawal. fits any machine with the pc4 M10 fillling, ender 3 , ender5, ender 5 plus, tornado and others

5/11/2020 added ,1mm length to all the standard type cut guages, due to many users getting under length cut without measuring the results. should not impact users significantly. also added two more robust/thicker cut guages for those who want it more rigid in .4 and .6 blade width

5/15/2020 Added CR10S PRO V2 to the family. it has a throat that is apprx 3mm shorter than the original cr10s pro. So to prevent issues it warrants its own set of guide and spacer.

6/6/2020 added ERYONE THINKER SE using user provided length target

8/18/2020 added CR6 SE 2/24/2021 renamed the cr10v2DD to the cr10 V3DD to be in alignment with printer name {i received the DD as an add on to the V2 at beta testing} 08-27-2021 Sovol S4 captured ptfe target 22.8 +-.2mm 08-28-2021 Added Monoprice mini tubing cutter for captured ptfe length target 26.3mm -.2 +0. tolerance 04-28-2022 Added Ender 3 max cut and spacer 31.2 to 31.6mm 09-10-2022 Added NEO and CR10 Smart series parts in 2 lengths as the E3 Max Neo was ! mm shorter than the E3v2 Neo 04/18/2024 ADDED SPRITE CAPTURED PTFE CUTTER 19.3MM TARGETLENGTH 19.2 TO 19.6 TOLERENCE 04/18/2024 E3V3SE CAPTURED PTFE 18.5 TARGET 18.3 TO 18.7 TOLERENCE

Print Settings

Printer Brand:

Creality

Printer:

CR-10S

Resolution:

.12

Infill:

100%

Filament: Tianse PLA Red Notes:

Files set to print at 60mm/s, 100% infill no supports. .12mm layer height.

Cut tubing length acceptable sizes

Ender 3, Ender 3 pro, Ender 5 plus, Cr10, CR 20 all variants of base Creality hot end must be between 31.2 and 31.4 mm long, gauge is set to cut 31.3 with an .6mm utility blade.

CR10 older uses cr10 spacer, but is shorter at 29.3 gauge 29.0 to 29.6 .6mm blade

CR10S Pro must be between 48.2 to 48.7 gauge is set to 48.5 with .6mm utility blade

CR10S Pro V2 must be between 50 and 50.5 mm gauge is set for both .4 and .6 blades

CR10 V2 must be between 43.5 and 43.9 gauge set to cut 43.7 with .6mm blade

CR10 V3 DD (direct drive) 80.2 to 80.4 arget length

CR6 SE must be between 39.2 and 39.6mm guide set to hit in range with .4 or .6 blade

Neo hot end Ender 3 Max 36.5 to 36.9mm, target of guide 36.5mm

Neo hot end Ender 3 V2 37.5 ti 37.9mm target of guide 37.5mm

CR10 Smart hot end 36.5 to 36.9mm, target of guide 36.5mm

Tevo Tornado must be between 26.2 to 26.6 gauge set to cut 26.4 with a .4mm blade

Tronxy X5SA must be between 33.5 to 33.9 gauge set to cut 33.7 with a .6mm blade

JGAURORA target is 23.65

ERYONE THINKER SE 34.8 MM not tested, 34.5 to 35 given as range for length. User provided dimension. Use any of the 8mm typical spacers.

!!! Special spacer's, these will fit inside the bore of larger id fittings, measure yours to know which is appropriate. !!!

How to correct the spacer if the hole is printing too small for filament to pass thru. Easiest way is to reduce your flow rate, either in the slicer, or you may over ride flow during the print. I would suggest a 5% decrease in flow, each attempt till you get desired result. The spacer is a 4 minute print solo. So don't be afraid to print it a time or two so you have a well fitting part. Alternate method, you can use one side of the flush cut plier jaws and rotate spacer on it to open up the hole. There is now a Video on why and installation https://www.youtube.com/watch?v=dIkjR2Ytx-g Discounted price fitting and tubing if needed. https://www.th3dstudio.com/product/essential-creality-ptfe-upgrade-pack/

Post-Printing

Step 1 Detail parts

1 .Make sure that the insert washer is able to pass a piece of filament loosely thru the center hole.

Ensure it easily fits inside the cooling block threaded countersink, so it is not stuck later during maintenance activities.

Check that the ptfe fits thru the cutting guide/guage. Step 2 Clear hot end and reset nozzle

Prepare the hot end

Heat up the hot end

Remove filament

Remove the bowden tube and its fitting

Remove the nozzle

Use ptfe to clear any plastic in throat by passing the ptfe top down thru the heat block several times

Make sure no plastic on mating surface/back of the nozzle and re install take temperature to 20 over operating temp and final tighten nozzle supporting heat block while tightening Step 3 Cut ptfe and install all parts

Use the cut guide/gauge to cut your ptfe piece for inside the hot end. Ender-3 length should be 31.2 to 31.4mm long CR10S Pro should be 48.2 to 48.4mm CR10 original should be 29 to 29.2mm

Tubing can come from the original tube, or upgrade by using capricorn xs, or TH3D tough tube for this hot zone piece

Have a piece of filament cut to about 100mm for testing fitment and a guiding assembly

Put the cut piece of tubing into the heated hot end

Put the spacer washer into the top of the cooling block

Hand screw the bowden fitting in until it just touches spacer washer

Put filament thru washer and slowly move it up and down while tightening the bowden coupler down on the spacer till its tight enough it wont easily back off in use.

There will be a small space between the shoulder of the fitting and cooling block. This is normal, and ensures the spacer is being compressed and compressing ptfe lightly into nozzle inside the hot end.

Push your supply ptfe into the fitting till it stops, pull up on lock collar and zip tie or put clip on.

Load filament

You are Done

Enjoy your new less back pressure flow, as the small void left by the push pull nature of the design of the original flow path have been eliminated. and your bowden fitting will see less forces trying to push the tube back.

See the pdf in files for e step calculation and flow rate tuning for your now better flowing hot end.

Congratulations, you should have many months of clear printing without void artifacts. For nozzle cleaning purposes, in your start gcode, add a purge at left front corner, to keep clogs from occuring. I offer this gcode, or alter your own. I want 45mm purged at F300. This may cause an occasional skip due to scrubbing forces .....its ok....

How I Designed This

Fusion 360

Modeled using parametric techniques

Maintenance and FAQ.

Does this effect routine maintenance of nozzle. No, as the tube should remain in place when removing and replacing a nozzle.

How do I get the cut ptfe out for changing it. Remove Bowden coupler, use a small Allen key to fish out the spacer, remove nozzle and push through while hot end heated with an 3mm Allen key wrench.

My spacer was a bit big and its stuck , not able to remove from top end. Heat up the hot end, remove the nozzle , use 3mm Allen key to push ptfe and washer from the bottom end , out the top.

How much skill does it take to do this mod? If you can handle removing a nozzle and Bowden fitting, routine maintenance, you should be ok to use this mod.

Does this alter my printer permanently. No, with the understanding that if you cut the primary bowden tube, it could be short on travel if you stop using mod and were to try and use tubing you cut.

CR10S Pro

Instructions for CR10S Pro and Pro v2

The CR10S pro has two set screws that lock the position of the throat in the heatsink. Because of this , there is no way to pre determine the cut length for the ptfe tubing. So i picked an appropriate length that should work for all the MK10 hot ends. Because of this, you will have to remove the heat block as part of the set up for the system to work. This is a one time activity. Afterwards, you will just remove the nozzle to swap out the ptfe insert for maintenance. Print the cut guide and spacer. Remove filament from the hot end. Remove nozzle Remove ptfe tube and fitting. Now while hot run ptfe thru throat and out of heat block a few times to clear any residual filament out. Unbolt heat break from frame Screw the heat break/throat out of heat block Loosen the 2 grub screws to the throat. Put cut length from guide provided into heat break, then put spacer on pushing it in. Screw the fitting into spacer firmly. Now adjust the throat so that the ptfe protrudes aprx .2mm from the throat. Reference the photo in this file to see what it should look like.

Re assembly. Heat up heat block to 215° Install nozzle, turn in till tight, then back off 1.5 turn. Screw the now adjusted heatsink and throat into the nozzle till its firmly against nozzle. Screw the heatbreak back to frame. Adjust the heat block to be square to the frame Heat up to 245°, or 20° hotter than the material temperature to be used. Final tighten the nozzle while supporting heat block Put the bowden tube into the coupler, pull the lock and install a clip or zip tie to lock it in place Congratulations, you should have many months of clear printing without void artifacts. For nozzle cleaning purposes, in your start gcode, add a purge at left front corner, to keep clogs from occuring. I offer this gcode, or alter your own. I want 45mm purged at F300. This may cause an occasional skip due to scrubbing forces .....its ok.....

Instructions for JGAURORA

A3S, A5, and A5S Hot End Fix

If your having problems with a clogged nozzle this should fix it. Matt from Home Science Ideas has made a video showing how it is done so please watch his video and if you have questions please post them on his video. He is always happy to help anyone!

Video Here: https://www.youtube.com/watch?v=52omhtXZLFM&feature=youtu.be&fbclid=IwAR1SBQgZKVhKw0a-h8N-LyXxMbH3gcXwLkihAtI6V2SNyZMym2N_qYIlZCs

There is no spacer for the JG series

stock length is 23.65 I have no tolerance range to offer, but +-.05 would seam to be a good goal.

CR10S Pro

Instructions for CR10S Pro and Pro v2

The CR10S pro has two set screws that lock the position of the throat in the heatsink. Because of this , there is no way to pre determine the cut length for the ptfe tubing. So i picked an appropriate length that should work for all the MK10 hot ends. Because of this, you will have to remove the heat block as part of the set up for the system to work. This is a one time activity. Afterwards, you will just remove the nozzle to swap out the ptfe insert for maintenance. Print the cut guide and spacer. Remove filament from the hot end. Remove nozzle Remove ptfe tube and fitting. Now while hot run ptfe thru throat and out of heat block a few times to clear any residual filament out. Unbolt heat break from frame Screw the heat break/throat out of heat block Loosen the 2 grub screws to the throat. Put cut length from guide provided into heat break, then put spacer on pushing it in. Screw the fitting into spacer firmly. Now adjust the throat so that the ptfe protrudes aprx .2mm from the throat. Reference the photo in this file to see what it should look like.

Re assembly. Heat up heat block to 215° Install nozzle, turn in till tight, then back off 1.5 turn. Screw the now adjusted heatsink and throat into the nozzle till its firmly against nozzle. Screw the heatbreak back to frame. Adjust the heat block to be square to the frame Heat up to 245°, or 20° hotter than the material temperature to be used. Final tighten the nozzle while supporting heat block Put the bowden tube into the coupler, pull the lock and install a clip or zip tie to lock it in place Congratulations, you should have many months of clear printing without void artifacts. For nozzle cleaning purposes, in your start gcode, add a purge at left front corner, to keep clogs from occuring. I offer this gcode, or alter your own. I want 45mm purged at F300. This may cause an occasional skip due to scrubbing forces .....its ok.....

Instructions for JGAURORA

A3S, A5, and A5S Hot End Fix

If your having problems with a clogged nozzle this should fix it. Matt from Home Science Ideas has made a video showing how it is done so please watch his video and if you have questions please post them on his video. He is always happy to help anyone!

Video Here: https://www.youtube.com/watch?v=52omhtXZLFM&feature=youtu.be&fbclid=IwAR1SBQgZKVhKw0a-h8N-LyXxMbH3gcXwLkihAtI6V2SNyZMym2N_qYIlZCs

There is no spacer for the JG series

stock length is 23.65 I have no tolerance range to offer, but +-.05 would seam to be a good goal.

 

Tags